Import .mxf file Fails

An evolving, supported alternative to Rovi
Forum rules
★ Download the latest EPG123 here: http://epg123.garyan2.net <> Setup guide here: http://epg123.garyan2.net/downloads/epg123_Guide.pdf
Post Reply
sptrainman

Posts: 18
Joined: Thu Jul 06, 2017 9:27 pm
Location:

HTPC Specs: Show details

Import .mxf file Fails

#1

Post by sptrainman » Wed Mar 06, 2019 8:17 pm

Hi,

For the last two days, I have had a failure to import the .xmf file reported. Also, my system is showing only 15 days of guide data remaining, but my system is set for 21 days of data.

The last few lines of the log show the following:

[3/6/2019 3:07:23 AM] [ INFO] Beginning epg123 client execution. 2019-03-06 10:07:23Z
[3/6/2019 3:07:23 AM] [ INFO] Import: True , Match: False , NoLogo: False , Force: False , ShowProgress: False
[3/6/2019 3:07:24 AM] Entering importMxfFile() for file "C:\ProgramData\GaRyan2\epg123\output\epg123.mxf"
[3/6/2019 3:13:44 AM] [ INFO] Error: The following error was encountered while processing the file. Aborting.
[3/6/2019 3:13:44 AM] [ INFO] RowSet::SetData failed (name=ScheduleEntry ScheduleEntryI_StoredObjectIdKey, rowHandle = 1, accessorHandle = 1) - HR = 0x80004005, minor = 28574, 1514, 0, 0, "", "", ""
[3/6/2019 3:13:52 AM] [ERROR] Error using loadmxf.exe to import new guide information. Exit code: -1
[3/6/2019 3:13:52 AM] Exiting importMxfFile(). FAILURE.
[3/6/2019 3:13:52 AM] [ERROR] Failed to import .mxf file. Exiting.

Thanks,
Jerry

User avatar
garyan2

Posts: 3491
Joined: Fri Nov 27, 2015 7:23 pm
Location:

HTPC Specs: Show details

#2

Post by garyan2 » Wed Mar 06, 2019 9:23 pm

Looks like your WMC database is corrupted. Take a look at this post to fix or rebuild it.
- Gary
Stomping out the Rovi disease, one media center at a time. http://epg123.garyan2.net

sptrainman

Posts: 18
Joined: Thu Jul 06, 2017 9:27 pm
Location:

HTPC Specs: Show details

#3

Post by sptrainman » Thu Mar 07, 2019 10:59 pm

Hi,
I had to go all the way to the last step of the procedure in order to correct the problem. I decided while I was at it to update to the latest version of the software.

I am now getting a successful import of the .mxf file. However, I now only have guide data until March 19 which is only 13 days of guide data. I have set up the parameter for 21 days of data. So I have no idea what is wrong there.

[3/7/2019 2:58:25 PM] Beginning epg123 client execution. version 1.2.11.0
[3/7/2019 2:58:25 PM] ===============================================================================
[3/7/2019 2:58:25 PM] [ INFO] Beginning epg123 client execution. 2019-03-07 21:58:25Z
[3/7/2019 2:58:25 PM] [ INFO] Import: True , Match: False , NoLogo: False , Force: False , ShowProgress: True
[3/7/2019 2:58:25 PM] Entering importMxfFile() for file "c:\programdata\garyan2\epg123\output\epg123.mxf"
[3/7/2019 3:00:51 PM] [ INFO] Successfully imported .mxf file into Media Center database. Exit code: 0
[3/7/2019 3:00:51 PM] Exiting importMxfFile(). SUCCESS.
[3/7/2019 3:00:51 PM] [ INFO] Completed lineup refresh.
[3/7/2019 3:00:51 PM] Entering runWmcTask(ReindexSearchRoot)
[3/7/2019 3:00:51 PM] [ INFO] SUCCESS: Attempted to run the scheduled task "Microsoft\Windows\Media Center\ReindexSearchRoot".
[3/7/2019 3:00:51 PM] [ INFO] Successfully started the ReindexSearchRoot task. Exit code: 0
[3/7/2019 3:00:51 PM] Exiting runWmcTask(ReindexSearchRoot). SUCCESS.
[3/7/2019 3:00:51 PM] [ INFO] Changed "Good Morning America" series recording request's 'anyLanguage' setting to TRUE.
[3/7/2019 3:00:51 PM] [ INFO] Changed "MacGyver" series recording request's 'anyLanguage' setting to TRUE.
[3/7/2019 3:00:51 PM] [ INFO] Changed "Hawaii Five-0" series recording request's 'anyLanguage' setting to TRUE.
[3/7/2019 3:00:51 PM] [ INFO] Changed "The Good Doctor" series recording request's 'anyLanguage' setting to TRUE.
[3/7/2019 3:00:51 PM] Entering runWmcTask(PvrScheduleTask)
[3/7/2019 3:00:51 PM] [ INFO] SUCCESS: Attempted to run the scheduled task "Microsoft\Windows\Media Center\PvrScheduleTask".
[3/7/2019 3:00:51 PM] [ INFO] Successfully started the PvrScheduleTask task. Exit code: 0
[3/7/2019 3:00:51 PM] Exiting runWmcTask(PvrScheduleTask). SUCCESS.
[3/7/2019 3:00:51 PM] [ INFO] Completed EPG123 client execution.
[3/7/2019 3:00:51 PM] [ INFO] EPG123 client execution time was 00:02:26.6162055.
[3/7/2019 3:15:01 PM] ===============================================================================
[3/7/2019 3:15:01 PM] Activating the epg123 configuration GUI. version 1.2.11.0
[3/7/2019 3:15:01 PM] ===============================================================================
[3/7/2019 3:15:02 PM] [ INFO] Successfully queried the Task Scheduler for status. Could not start. Last Run 3/7/2019 2:56:00 AM; Exit: 0xFFFFFFFF
[3/7/2019 3:15:03 PM] [ INFO] Token request successful. serverID: 20141201.web.1
[3/7/2019 3:15:03 PM] [ INFO] Status request successful. account expires: 2019-09-04T21:41:22Z , lineups: 1/4 , lastDataUpdate: 2019-03-07T22:05:39Z
[3/7/2019 3:15:03 PM] [ INFO] system status: Online , message: No known issues.
[3/7/2019 3:15:03 PM] [ INFO] Successfully requested listing of client lineups from Schedules Direct.
[3/7/2019 3:15:04 PM] [ INFO] Successfully retrieved the station mapping for lineup USA-AZ02490-X.
[3/7/2019 3:16:07 PM] [ INFO] Successfully requested listing of client lineups from Schedules Direct.
[3/7/2019 3:16:30 PM] [ INFO] Successfully requested listing of client lineups from Schedules Direct.
[3/7/2019 3:16:30 PM] [ INFO] Successfully retrieved the station mapping for lineup USA-AZ02490-X.
[3/7/2019 3:16:55 PM] ===============================================================================
[3/7/2019 3:16:55 PM] Activating the epg123 client GUI. version 1.2.11.0
[3/7/2019 3:16:55 PM] ===============================================================================
[3/7/2019 3:16:55 PM] [ INFO] Successfully queried the Task Scheduler for status. Could not start. Last Run 3/7/2019 2:56:00 AM; Exit: 0xFFFFFFFF
[3/7/2019 3:28:26 PM] [ERROR] Unhandled thread exception caught from epg123Client.exe. message: Unable to commit the StoredObject of id 1C0000000096EE back to the ObjectStore. Initial revision = 0, previous revision = 0, current revision = 3
[3/7/2019 3:29:10 PM] ===============================================================================
[3/7/2019 3:29:10 PM] Activating the epg123 configuration GUI. version 1.2.11.0
[3/7/2019 3:29:10 PM] ===============================================================================
[3/7/2019 3:29:11 PM] [ INFO] Successfully queried the Task Scheduler for status. Could not start. Last Run 3/7/2019 2:56:00 AM; Exit: 0xFFFFFFFF
[3/7/2019 3:29:11 PM] [ INFO] Token request successful. serverID: 20141201.web.1
[3/7/2019 3:29:11 PM] [ INFO] Status request successful. account expires: 2019-09-04T21:41:22Z , lineups: 1/4 , lastDataUpdate: 2019-03-07T22:05:39Z
[3/7/2019 3:29:11 PM] [ INFO] system status: Online , message: No known issues.
[3/7/2019 3:29:11 PM] [ INFO] Successfully requested listing of client lineups from Schedules Direct.
[3/7/2019 3:29:12 PM] [ INFO] Successfully retrieved the station mapping for lineup USA-AZ02490-X.




I had some problems with the TV Setup procedure as my WMC screen is not the same as what is shown in the guide. There is an option by WMC for automatic or manual update of the guide data. I'm not sure which one to pick. So I am not confident the WMC is not going to corrupt the guide again.

Thanks in advance for your help,
Jerry

User avatar
garyan2

Posts: 3491
Joined: Fri Nov 27, 2015 7:23 pm
Location:

HTPC Specs: Show details

#4

Post by garyan2 » Thu Mar 07, 2019 11:13 pm

Since you updated from a version from quite a while back, you will need to delete and recreate you scheduled task. Be sure to enable the option to "Automatically import ..." in the configuration GUI, or select Full Mode in the client when you create it. I'm thinking that might take care of it.
- Gary
Stomping out the Rovi disease, one media center at a time. http://epg123.garyan2.net

sptrainman

Posts: 18
Joined: Thu Jul 06, 2017 9:27 pm
Location:

HTPC Specs: Show details

#5

Post by sptrainman » Fri Mar 08, 2019 4:54 pm

Gary,

The update ran last night at the scheduled time. However, there does not appear to be any additional data available since yesterday afternoon. I have found that the number of days of data varies with the channel. The latest date I had yesterday afternoon was March 24. It is the same thing this morning, so evidently, the program is getting all the data there is which is less than 21 days.

Thanks,
Jerry

User avatar
garyan2

Posts: 3491
Joined: Fri Nov 27, 2015 7:23 pm
Location:

HTPC Specs: Show details

#6

Post by garyan2 » Fri Mar 08, 2019 6:28 pm

The reason to recreate the task is because the location of the generated output MXF has changed and the old task will point to the old location. Performing a [Save & Execute] from the configuration GUI will work to properly update your guide, but the old task will not.

Could you send me your trace.log file so I can review it? I might be able to determine if there are any other issues.
- Gary
Stomping out the Rovi disease, one media center at a time. http://epg123.garyan2.net

Post Reply