EPG123 Bug Reports
Forum rules
★ Download the latest EPG123 here: https://garyan2.github.io/ <> Setup guide here: https://garyan2.github.io/install.html ★
★ Download the latest EPG123 here: https://garyan2.github.io/ <> Setup guide here: https://garyan2.github.io/install.html ★
-
- Posts: 380
- Joined: Thu Jan 16, 2014 1:35 am
- Location: Marina Del Rey, CA
- HTPC Specs:
More clues...
(1) I have a 31" Eizo CG318-4K which I run in 2560x1440 resolution, also 125% and Aero. And with this higher resolution situation the text from EPG123 in the title bar does display.
It's on my other machine, which runs 1920x1200 and 125% and Aero where the EPG123 text in the title bar is missing.
(2) I have another legacy application, Clockwise, which I also have been running for many years and for which the text in the title bar (day) does or does not display. Interestingly, again on the 2560x1440 resolution Eizo the text DOES display.
Once again, on the other machine which runs 1920x1200 the Clockwise text in the title bar does not display.
(1) I have a 31" Eizo CG318-4K which I run in 2560x1440 resolution, also 125% and Aero. And with this higher resolution situation the text from EPG123 in the title bar does display.
It's on my other machine, which runs 1920x1200 and 125% and Aero where the EPG123 text in the title bar is missing.
(2) I have another legacy application, Clockwise, which I also have been running for many years and for which the text in the title bar (day) does or does not display. Interestingly, again on the 2560x1440 resolution Eizo the text DOES display.
Once again, on the other machine which runs 1920x1200 the Clockwise text in the title bar does not display.
-
- Posts: 380
- Joined: Thu Jan 16, 2014 1:35 am
- Location: Marina Del Rey, CA
- HTPC Specs:
(3) Note that if Aero is suppressed and the 1920x1200 screen runs in Basic mode, lo and behold the Clockwise title bar text now is presented.
- Einstien
- Posts: 31
- Joined: Sat Dec 22, 2018 12:54 am
- Location: Venice CA
- HTPC Specs:
Just checked back in and found your post. Thank you so much. i searched and searched for this and could never find it!garyan2 wrote: ↑Tue Jan 22, 2019 2:14 amHadn't forgotten about you. The registry key you are looking for is...Einstien wrote: ↑Fri Dec 28, 2018 5:25 am Hello again,
about the mini guide timeout. Personally, I would like it to stay on until I hit the back button to kill it, but any longer option would be welcome. What bugs me, is it times out after a few seconds, then when you re-initiate it, it does not pick up where you left off, so you have to start from the begging all over again. It's a handy little feature as you can still monitor your channel while stepping through the guide. I think it would be a nice feature in the tweaks if possible. Thanks
BTW, sorry for the long post in Introducing EPG123. I am just so excited and impressed - GENIUS!
The default (00002ee0) is 12000 milliseconds, or 12 seconds. You could set it to dword:0001d4c0 which is 120000 ms, or 120 seconds. Should be plenty of time.Code: Select all
Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Settings\VideoConstants] "NowPlayingTimeout"=dword:00002ee0
- garyan2
- Posts: 7480
- Joined: Fri Nov 27, 2015 7:23 pm
- Location:
- HTPC Specs:
There was no schedule information for HBO Latina on the last update. Basically, for that station, you only have 20 days of guide listings as opposed to 21.
You also had some time discontinuities in the schedule data for UCLAS on 1/31, 2/1, and 2/2. That stations guide might have an error in it on those days.
- Gary
Keeping WMC alive beyond January 2020. https://garyan2.github.io
Keeping WMC alive beyond January 2020. https://garyan2.github.io
-
- Posts: 97
- Joined: Sat Jul 26, 2014 1:31 am
- Location:
- HTPC Specs:
Oh, that is good! Because I don't have HBO Latina or UCLAS anyway.
Thank you!
Thank you!
- garyan2
- Posts: 7480
- Joined: Fri Nov 27, 2015 7:23 pm
- Location:
- HTPC Specs:
You can always unselect those stations you don't have or watch for download. The extra effort will reduce the file size, your database size, and reduce the likelyhood of getting warnings for channels you don't care about. But anytime you have a yellow icon, just search the trace.log file for WARNG... a red icon means there was an ERROR that you need to search for.
- Gary
Keeping WMC alive beyond January 2020. https://garyan2.github.io
Keeping WMC alive beyond January 2020. https://garyan2.github.io
-
- Posts: 9
- Joined: Wed Nov 28, 2012 1:07 am
- Location:
- HTPC Specs:
I searched the Log for Warning and found a few of the following:
[1/28/2019 1:09:04 AM] [WARNG] The imported MXF file contained a WARNING in its status field.
Is there a way to identify what channels are causing the MXF error (Not sure if what I said is the right way to say it)
[1/28/2019 1:09:04 AM] [WARNG] The imported MXF file contained a WARNING in its status field.
Is there a way to identify what channels are causing the MXF error (Not sure if what I said is the right way to say it)
- garyan2
- Posts: 7480
- Joined: Fri Nov 27, 2015 7:23 pm
- Location:
- HTPC Specs:
The warning you posted is put in the log file by the client program after it imported the MXF file and inspected it. The real warning is going to be from the configuration program. Wherever the MXF file is created, that machine will have the real Warnings and Errors that you can track down what the problem station is.GaryDZ wrote: ↑Thu Jan 31, 2019 9:55 pm I searched the Log for Warning and found a few of the following:
[1/28/2019 1:09:04 AM] [WARNG] The imported MXF file contained a WARNING in its status field.
Is there a way to identify what channels are causing the MXF error (Not sure if what I said is the right way to say it)
- Gary
Keeping WMC alive beyond January 2020. https://garyan2.github.io
Keeping WMC alive beyond January 2020. https://garyan2.github.io
-
- Posts: 22
- Joined: Sat Jun 03, 2017 3:53 am
- Location:
- HTPC Specs:
I get a warning in EPG123 about a warning flag in the MXF file. What am I supposed to do?
- garyan2
- Posts: 7480
- Joined: Fri Nov 27, 2015 7:23 pm
- Location:
- HTPC Specs:
Nothing really. It is letting you know something may not be 100% correct... the trace.log file will be able to tell you which station and when. If the problem is persistent, then letting SD know is a good idea.
- Gary
Keeping WMC alive beyond January 2020. https://garyan2.github.io
Keeping WMC alive beyond January 2020. https://garyan2.github.io
-
- Posts: 22
- Joined: Sat Jun 03, 2017 3:53 am
- Location:
- HTPC Specs:
I looked at the trace.log to find the MXF warning error. There was no information about what was causing it, at least not that I saw. There were a lot of new channels that I do not watch, nor really even know what they are. So I unchecked those and ran EPG123 again as I was leaving for work. I will check when I get home.
-
- Posts: 22
- Joined: Sat Jun 03, 2017 3:53 am
- Location:
- HTPC Specs:
clearing out the new channels fixed the warning issue.
- garyan2
- Posts: 7480
- Joined: Fri Nov 27, 2015 7:23 pm
- Location:
- HTPC Specs:
Just checked, and yup... at some point I decided that I would make the users that do not automatically add new stations to the download aware of them by making it a warning. By updating the configuration file with the new stations, you cleared out the warnings.
- Gary
Keeping WMC alive beyond January 2020. https://garyan2.github.io
Keeping WMC alive beyond January 2020. https://garyan2.github.io
- garyan2
- Posts: 7480
- Joined: Fri Nov 27, 2015 7:23 pm
- Location:
- HTPC Specs:
Something is going on during the automatch routine. Everything else is working fine, so updates are not an issue. You could turn off the automatch routine in your scheduled task, or can try the following:
1) Open the client
2) select all channels on the left side (Ctrl+A) works for that.
3) right-click any channel on the left side and select unsubscribe (this will take a few seconds, maybe tens of seconds)
4) on the right side, select your OTA lineup then click the Match by: [# Number] button on the left side above the channels
5) on the right side, select your cable lineup then click the Match by: [# Number] button on the left side again
6) on the right side, if there are any lineups in the pulldown that you do not use, select them and then delete them by selecting the red 'X' to the right of the lineup pulldown (you may have to extend the window to see it or click the expand down arrow)
6) Close the client and open the configuration GUI
7) Click the [Save & Execute] button to try again
If you still have a red icon, then may need to see your trace.log file again.
- Gary
Keeping WMC alive beyond January 2020. https://garyan2.github.io
Keeping WMC alive beyond January 2020. https://garyan2.github.io
-
- Posts: 97
- Joined: Sat Jul 26, 2014 1:31 am
- Location:
- HTPC Specs:
That seemed to work, thank you!
- garyan2
- Posts: 7480
- Joined: Fri Nov 27, 2015 7:23 pm
- Location:
- HTPC Specs:
As the trace.log shows, you have a yellow icon now because there were no guide listings provided for CNN International. Nothing to worry about unless it persists (tomorrow/next day).
Losing channel logos does not make sense. All the channel logos?
I see you are still having the "Skipped matching ..." entries in the trace.log file. Did you do all the steps outlined above, to include deleting lineups that you do not use? That would be number 6 (the first #6 ... just noticed that ).
Losing channel logos does not make sense. All the channel logos?
I see you are still having the "Skipped matching ..." entries in the trace.log file. Did you do all the steps outlined above, to include deleting lineups that you do not use? That would be number 6 (the first #6 ... just noticed that ).
- Gary
Keeping WMC alive beyond January 2020. https://garyan2.github.io
Keeping WMC alive beyond January 2020. https://garyan2.github.io
-
- Posts: 97
- Joined: Sat Jul 26, 2014 1:31 am
- Location:
- HTPC Specs:
I did delete the unused lineups.