Introducing EPG123
Forum rules
★ Download the latest EPG123 here: https://garyan2.github.io/ <> Setup guide here: https://garyan2.github.io/install.html ★
★ Download the latest EPG123 here: https://garyan2.github.io/ <> Setup guide here: https://garyan2.github.io/install.html ★
-
- Posts: 17
- Joined: Mon Dec 17, 2012 11:42 am
- Location:
- HTPC Specs:
Finally got it working like it should. Of course part of it was user error! Fiddled around with settings a bit and everything is working as it should... Yay! Just sent you a donation as I finally got on the bandwagon after using your program for quite a while now. Sorry for how long it took but better late than never! Besides, us AZ homies gots ta stick together! lol
Thanks again for all the work on this program and the support you give everyone!
Thanks again for all the work on this program and the support you give everyone!
-
- Posts: 41
- Joined: Wed Mar 01, 2017 5:05 pm
- Location:
- HTPC Specs:
Sorry for the late reply, been off the internet due to the holidays.garyan2 wrote:Do you not use logos, then?dkm wrote:New feature for that settings screen - Option to show/hide channel numbers in the guides. Personally I do not use channel numbers, I organize my guide alphabetically by name.
I do use logos. They are the only thing in the first column of my guide. Since I never tune directly by channel number, and only through the guide, I don't need to know CBS is channel 1, etc. I also don't need to see "WXYZ" or whatever the callsign is next to the logo, since that is usually either duplicate information (WCBS is CBS) or confusing (WXYZ is NBC). The callsign is still tracked in the back end, I can get to it if I edit the channel in the guide, as that is what is actually sorted on when I sort alphabetically.
Update - I see the feature in the latest tweak utility. Thank you!
- garyan2
- Posts: 7480
- Joined: Fri Nov 27, 2015 7:23 pm
- Location:
- HTPC Specs:
Quite all right. I'm strictly OTA here, so my question was along those lines that the WQRK call signs don't mean anything at all and sorting by name has no benefit. Nevertheless, I implemented your request and actually like the look of it very much. I didn't think I would, but it grew on me pretty quickly.dkm wrote:Sorry for the late reply, been off the internet due to the holidays.garyan2 wrote:Do you not use logos, then?dkm wrote:New feature for that settings screen - Option to show/hide channel numbers in the guides. Personally I do not use channel numbers, I organize my guide alphabetically by name.
I do use logos. They are the only thing in the first column of my guide. Since I never tune directly by channel number, and only through the guide, I don't need to know CBS is channel 1, etc. I also don't need to see "WXYZ" or whatever the callsign is next to the logo, since that is usually either duplicate information (WCBS is CBS) or confusing (WXYZ is NBC). The callsign is still tracked in the back end, I can get to it if I edit the channel in the guide, as that is what is actually sorted on when I sort alphabetically.
Update - I see the feature in the latest tweak utility. Thank you!
You can pick up the new version of EPG123 with the new tool and give it a go. There is also an active beta version of the client tool with some improvements located here (http://epg123.garyan2.net/downloads/epg ... t_beta.zip).
- Gary
Keeping WMC alive beyond January 2020. https://garyan2.github.io
Keeping WMC alive beyond January 2020. https://garyan2.github.io
-
- Posts: 46
- Joined: Thu Mar 08, 2012 3:12 pm
- Location:
- HTPC Specs:
I'm new to epg123, still on 7 day trial so trying to evaluate as much as possible as quickly as I can with the trial time restraint. If I edit a logo and replace the logo in .\logos, I'd like to see as soon as possible how it looks in the guide. You state above that the next time a MXF file is created, I can see the result of the new logo being inserted. Is the MXF file created only when the Scheduled Task is run (overnight in my case)? Can I expedite this, like in MCL? (I remember with MCL, I can change the logo, hit a button (I think), close WMC, reopen it, and it was there. It took 2 minutes or less. Can this be done?)garyan2 wrote:I download the logos linked by Schedules Direct and place them in a sub-folder \sdlogos. From there, you can take any of the logos and edit them for size, aspect, and even color to make it look good in the guide. Once you are done, all you have to is place the finished logo and place it in a different sub-folder \logos. The logo must be a .png and the name must be the call sign of the station it is for.dkrom wrote:I'd like to incorporate the logos that epg123 downloads, but I don't have My Channel Logos - how do you go about adding them without My Channel Logos? I've scoured the internet and have yet to find directions, but the directions for epg123 say that it's possible. I have no qualms editing files, the registry, etc.
The MCL website defines how to make the logos look right here. The takeaway from their instruction is:
Code: Select all
Size 42 px tall by 96 px wide for regular logos. 75 px tall by 225 px wide for big logos If your logo is not wide enough: Do not center a blank space. Cut the width down so it just fits the logo. No padding! If your logo is not tall enough: Center the logo vertically in a transparent 42 x 96 pixel background (or 75x225px background)
The next time a MXF file is created, it will use the logos in the .\logos folder if you have the option selected.
- garyan2
- Posts: 7480
- Joined: Fri Nov 27, 2015 7:23 pm
- Location:
- HTPC Specs:
EPG123 is a little different than MCL with this in that instead of pointing to the image file on a drive, EPG123 actually embeds the image in the MXF file. The same MXF file can then be imported into an infinite number of media centers and they will all have the same logos.PeteS457 wrote:I'm new to epg123, still on 7 day trial so trying to evaluate as much as possible as quickly as I can with the trial time restraint. If I edit a logo and replace the logo in .\logos, I'd like to see as soon as possible how it looks in the guide. You state above that the next time a MXF file is created, I can see the result of the new logo being inserted. Is the MXF file created only when the Scheduled Task is run (overnight in my case)? Can I expedite this, like in MCL? (I remember with MCL, I can change the logo, hit a button (I think), close WMC, reopen it, and it was there. It took 2 minutes or less. Can this be done?)
To make it happen immediately(ish), you need to perform a Save&Execute to update the MXF file with the new logo and to import into the database.
- Gary
Keeping WMC alive beyond January 2020. https://garyan2.github.io
Keeping WMC alive beyond January 2020. https://garyan2.github.io
-
- Posts: 46
- Joined: Thu Mar 08, 2012 3:12 pm
- Location:
- HTPC Specs:
Ugghhh...that's what I was afraid of. I did a Save&Execute manually and yes, I saw the logos I had replaced, but they still needed tweaking as I learn how to improve them with gimp, etc. So this is a process. And a Save&Execute (in my case), takes 10-15 minutes each time.
- garyan2
- Posts: 7480
- Joined: Fri Nov 27, 2015 7:23 pm
- Location:
- HTPC Specs:
You can shorten the time by copying the exe files, your config file, and your logos folder to another directory and change the number of days to download to 1 day. Run from there.PeteS457 wrote:Ugghhh...that's what I was afraid of. I did a Save&Execute manually and yes, I saw the logos I had replaced, but they still needed tweaking as I learn how to improve them with gimp, etc. So this is a process. And a Save&Execute (in my case), takes 10-15 minutes each time.
- Gary
Keeping WMC alive beyond January 2020. https://garyan2.github.io
Keeping WMC alive beyond January 2020. https://garyan2.github.io
-
- Posts: 46
- Joined: Thu Mar 08, 2012 3:12 pm
- Location:
- HTPC Specs:
OK. That makes sense now that I know what goes into a MXF file. I had my number of days to download set to 21 so that's why it was taking so long. If I copy the files you indicated and run it from another directory with it fetching only one days' guide info, it will run quicker and I assume automatically load it into the guide from there for testing purposes. When I get the logos like I want, I can remove the directory and run Save&Execute from the original directory to restore the 21 day guide info and it will run as a scheduled task overnight to keep it up to date. If this is incorrect, please correct me. Thanks very much.
-
- Posts: 1708
- Joined: Fri Aug 24, 2012 7:35 pm
- Location:
- HTPC Specs:
Welcome to epg123. I've been using it since early beta in March or April 2016 and couldn't be happier!
Just a little suggestion, if you like it too, slip Gary a couple bucks to take his kids out for ice cream!
Sent from my SM-G930P using Tapatalk
Just a little suggestion, if you like it too, slip Gary a couple bucks to take his kids out for ice cream!
Sent from my SM-G930P using Tapatalk
- garyan2
- Posts: 7480
- Joined: Fri Nov 27, 2015 7:23 pm
- Location:
- HTPC Specs:
I would note that you need to copy the logo into the production epg123\logos folder. If you don't, then the logo will revert back to a previous logo that is there.PeteS457 wrote:OK. That makes sense now that I know what goes into a MXF file. I had my number of days to download set to 21 so that's why it was taking so long. If I copy the files you indicated and run it from another directory with it fetching only one days' guide info, it will run quicker and I assume automatically load it into the guide from there for testing purposes. When I get the logos like I want, I can remove the directory and run Save&Execute from the original directory to restore the 21 day guide info and it will run as a scheduled task overnight to keep it up to date. If this is incorrect, please correct me. Thanks very much.
- Gary
Keeping WMC alive beyond January 2020. https://garyan2.github.io
Keeping WMC alive beyond January 2020. https://garyan2.github.io
-
- Posts: 10
- Joined: Tue Mar 05, 2013 11:52 pm
- Location:
- HTPC Specs:
garyan2, can you add an option to center the logos in the tweak section?
- garyan2
- Posts: 7480
- Joined: Fri Nov 27, 2015 7:23 pm
- Location:
- HTPC Specs:
Done... next update.swinn wrote:garyan2, can you add an option to center the logos in the tweak section?
- Gary
Keeping WMC alive beyond January 2020. https://garyan2.github.io
Keeping WMC alive beyond January 2020. https://garyan2.github.io
- StinkyImp
- Posts: 675
- Joined: Thu May 11, 2017 7:53 pm
- Location:
- HTPC Specs:
Can you make it so we can update only the icons without having to perform "Save and Execute" after we create custom icons to drop in the "logos" folder?garyan2 wrote:Done... next update.
Obligatory -> Pretty Please?
PS - If this is already possible, please disregard.
- garyan2
- Posts: 7480
- Joined: Fri Nov 27, 2015 7:23 pm
- Location:
- HTPC Specs:
I hate to so "no", especially with such a persuasive request! But I will say "no" for right now for the simple fact that MCL XL can do that for you and it is now Freeware! You'll be able to take your custom logos and check them out quickly with it before making it final in the .\logos folder.StinkyImp wrote:Can you make it so we can update only the icons without having to perform "Save and Execute" after we create custom icons to drop in the "logos" folder?garyan2 wrote:Done... next update.
Obligatory -> Pretty Please?
PS - If this is already possible, please disregard.
http://www.mychannellogos.com/
- Gary
Keeping WMC alive beyond January 2020. https://garyan2.github.io
Keeping WMC alive beyond January 2020. https://garyan2.github.io
- StinkyImp
- Posts: 675
- Joined: Thu May 11, 2017 7:53 pm
- Location:
- HTPC Specs:
TIL, I remember seeing somewhere that TunerSalad had become freeware, but didn't know about MCL XL.garyan2 wrote:I will say "no" for right now for the simple fact that MCL XL can do that for you and it is now Freeware!
I really like that EPG123 is becoming more than just a guide updater... You're making it into the Swiss Army Knife for WMC (and for that I'm grateful)!
-
- Posts: 2840
- Joined: Sun Jun 02, 2013 9:44 pm
- Location:
- HTPC Specs:
Me neither! Is there a way to download and archive all the logos for the different regions (which I assume are also now free) in case the website is taken down at some point in the future?StinkyImp wrote:TIL, I remember seeing somewhere that TunerSalad had become freeware, but didn't know about MCL XL.garyan2 wrote:I will say "no" for right now for the simple fact that MCL XL can do that for you and it is now Freeware!
...
- garyan2
- Posts: 7480
- Joined: Fri Nov 27, 2015 7:23 pm
- Location:
- HTPC Specs:
He just got the website updated last night to stay (evidently had problems) for the free download of MCL XL.Space wrote:Me neither! Is there a way to download and archive all the logos for the different regions (which I assume are also now free) in case the website is taken down at some point in the future?
Yes, when you install MCL XL, it will download for your current region. You can the change the region in the GUI and download logos for that region (Check for logo updates button). Rinse & Repeat for all the regions and you will have all the logos in C:\ProgramData\MyChannelLogos\Logos folder.
- Gary
Keeping WMC alive beyond January 2020. https://garyan2.github.io
Keeping WMC alive beyond January 2020. https://garyan2.github.io
-
- Posts: 196
- Joined: Sun Aug 07, 2011 3:29 am
- Location:
- HTPC Specs:
Truly amazing, Gary. I hadn't even looked at this thread for a year until my setup puked recently. When I did the re-install yesterday, I was shocked at how you've simplified everything and even added tweaking options. Hurray.
I do have one question though, I ran through setup once (right after the clean install of Windows 8.1) and the tuner config tool worked perfectly- 9 tuners as it should be (Ceton Infinitv PCIe6 + 1 HDHomerun Prime). Everything worked but then I was a dummy and ended up re-running through setup...now, no matter what I do, I'm stuck with 4 tuners, like some lame-o. I've tried running through setup multiple times but each time WMC reports that 4 is my limit. Does anyone have a suggestion? I even tried re-installing the Ceton Infinitv driver to see if their tool would work.
I do have one question though, I ran through setup once (right after the clean install of Windows 8.1) and the tuner config tool worked perfectly- 9 tuners as it should be (Ceton Infinitv PCIe6 + 1 HDHomerun Prime). Everything worked but then I was a dummy and ended up re-running through setup...now, no matter what I do, I'm stuck with 4 tuners, like some lame-o. I've tried running through setup multiple times but each time WMC reports that 4 is my limit. Does anyone have a suggestion? I even tried re-installing the Ceton Infinitv driver to see if their tool would work.
- garyan2
- Posts: 7480
- Joined: Fri Nov 27, 2015 7:23 pm
- Location:
- HTPC Specs:
Use the client Tweak WMC window to increase the tuner limit. Close the client and then open WMC and perform the TV Setup. You should have all tuners again during setup. You will then have to manually perform Step 3 (EPG123 Configuration GU, Save & Execute) to get your guide back in.Embiggens wrote:Truly amazing, Gary. I hadn't even looked at this thread for a year until my setup puked recently. When I did the re-install yesterday, I was shocked at how you've simplified everything and even added tweaking options. Hurray.
I do have one question though, I ran through setup once (right after the clean install of Windows 8.1) and the tuner config tool worked perfectly- 9 tuners as it should be (Ceton Infinitv PCIe6 + 1 HDHomerun Prime). Everything worked but then I was a dummy and ended up re-running through setup...now, no matter what I do, I'm stuck with 4 tuners, like some lame-o. I've tried running through setup multiple times but each time WMC reports that 4 is my limit. Does anyone have a suggestion? I even tried re-installing the Ceton Infinitv driver to see if their tool would work.
For the next release, I have beefed up the client setup routine a bit to hopefully be more reliable in increasing the tuner limit. In this case, timing is everything and if I apply the increase too soon, it will very quickly disappear due to WMC getting "updated" from mother MS.
- Gary
Keeping WMC alive beyond January 2020. https://garyan2.github.io
Keeping WMC alive beyond January 2020. https://garyan2.github.io
- StinkyImp
- Posts: 675
- Joined: Thu May 11, 2017 7:53 pm
- Location:
- HTPC Specs:
Just an FYI... I've been running EPG123 since 1.0.0 or 1.0.1? Either way, it's been a long time. My log files span 581 days (1 year, 7 months, 4 days) and have almost 44,000 lines of data. I thought it would be interesting to see how many errors were generated in all that time.
This, my friends, is a testament to the integrity and dependability of EPG123 (and to garyan2's skills).
Interesting facts:
I have upgraded to every version (with very few exceptions) and have found EPG123 to be a reliable, stable, and trustworthy workhorse for WMC's guide. I have no misgivings or regrets about dumping Microsoft/Rovi for my guide data.
Hats off to EPG123 and garyan2!
This, my friends, is a testament to the integrity and dependability of EPG123 (and to garyan2's skills).
Interesting facts:
- 62 Total errors (To my understanding, none are attributable to EPG123).
- 25 of those errors were duplicated on 10/19/2017 (meaning there were only 37 errors in total).
- Only 12 errors have occurred during 2018 (and one of those was mine).
- There have been NO ERRORS since June 5th (96 days or 3 months, 4 days).
Code: Select all
EPG123 Log Parser (and Report Generator)
Report Created on 09/08/2018 at 06:15:30
================================================================
1 [2/5/2017 9:11:26 AM] [ERROR] SD API Unknown exception thrown. Message: Error creating the Web Proxy specified in the 'system.net/defaultProxy' configuration section.
2 [2/5/2017 9:11:26 AM] [ERROR] Did not receive a response from Schedules Direct for a version check.
3 [2/5/2017 9:35:32 AM] [ERROR] SD API WebException Thrown. Message: The remote server returned an error: (400) Bad Request. , Status: ProtocolError
4 [2/5/2017 9:35:32 AM] [ERROR] SD responded with error code: 4102 , message: No lineups have been added to this account. , serverID: 20141201.web.2 , datetime: 2017-02-05T16:35:34Z
5 [2/5/2017 9:35:32 AM] [ERROR] Did not receive a response from Schedules Direct for a client lineup listings.
6 [2/13/2017 10:03:16 AM] [ERROR] SD API Unknown exception thrown. Message: Error creating the Web Proxy specified in the 'system.net/defaultProxy' configuration section.
7 [2/13/2017 10:03:16 AM] [ERROR] Did not receive a response from Schedules Direct for a version check.
8 [2/17/2017 2:00:14 AM] [ERROR] TMDb API WebException thrown. Message: The remote name could not be resolved: 'api.themoviedb.org' , Status: NameResolutionFailure
9 [2/22/2017 2:05:16 AM] [ERROR] SD API WebException Thrown. Message: The operation has timed out , Status: Timeout
10 [2/22/2017 2:12:02 AM] [ERROR] SD API WebException Thrown. Message: The operation has timed out , Status: Timeout
11 [2/23/2017 2:02:32 AM] [ERROR] SD API WebException Thrown. Message: The operation has timed out , Status: Timeout
12 [2/23/2017 2:10:20 AM] [ERROR] SD API WebException Thrown. Message: The operation has timed out , Status: Timeout
13 [4/10/2017 2:00:15 AM] [ERROR] TMDb API WebException thrown. Message: The remote name could not be resolved: 'api.themoviedb.org' , Status: NameResolutionFailure
14 [4/10/2017 2:00:28 AM] [ERROR] Did not receive a response from Schedules Direct for a token request.
15 [4/10/2017 2:00:28 AM] [ERROR] Failed to retrieve Token from Schedules Direct. Exiting.
16 [6/11/2017 01:01:43PM] [ERROR] Cannot perform runtime binding on a null reference
17 [7/9/2017 2:01:16 AM] [ERROR] A program recording is currently in progress. Aborting the mxf file import.
18 [7/29/2017 2:00:01 AM] [ERROR] Failed token request. code: 3000 , message: Server offline for maintenance. , datetime: 2017-07-29T09:00:12Z
19 [7/29/2017 2:00:01 AM] [ERROR] Failed to retrieve token from Schedules Direct. message: Failed token request. code: 3000 , message: Server offline for maintenance. , datetime: 2017-07-29T09:00:12Z
20 [8/12/2017 2:00:11 AM] [ERROR] SD API WebException Thrown. Message: The remote name could not be resolved: 'json.schedulesdirect.org' , Status: NameResolutionFailure
21 [8/12/2017 2:00:11 AM] [ERROR] Did not receive a response from Schedules Direct for a token request.
22 [8/12/2017 2:00:11 AM] [ERROR] Failed to retrieve token from Schedules Direct. message: Did not receive a response from Schedules Direct for a token request.
23 [8/18/2017 2:00:23 AM] [ERROR] SD API WebException Thrown. Message: The remote name could not be resolved: 'json.schedulesdirect.org' , Status: NameResolutionFailure
24 [8/18/2017 2:00:23 AM] [ERROR] Did not receive a response from Schedules Direct for a token request.
25 [8/18/2017 2:00:23 AM] [ERROR] Failed to retrieve token from Schedules Direct. message: Did not receive a response from Schedules Direct for a token request.
26 [10/19/2017 2:00:31 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
27 [10/19/2017 2:00:31 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
28 [10/19/2017 2:00:31 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
29 [10/19/2017 2:00:31 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
30 [10/19/2017 2:00:31 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
31 [10/19/2017 2:00:31 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
32 [10/19/2017 2:00:31 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
33 [10/19/2017 2:00:31 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
34 [10/19/2017 2:00:31 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
35 [10/19/2017 2:00:31 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
36 [10/19/2017 2:00:31 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
37 [10/19/2017 2:00:32 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
38 [10/19/2017 2:00:32 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
39 [10/19/2017 2:00:32 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
40 [10/19/2017 2:00:32 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
41 [10/19/2017 2:00:32 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
42 [10/19/2017 2:00:32 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
43 [10/19/2017 2:00:32 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
44 [10/19/2017 2:00:32 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
45 [10/19/2017 2:00:32 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
46 [10/19/2017 2:00:33 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
47 [10/19/2017 2:00:33 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
48 [10/19/2017 2:00:33 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
49 [10/19/2017 2:00:33 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
50 [10/19/2017 2:00:33 AM] [ERROR] Did not find expected Md5Schedule file in cache directory.
51 [2/19/2018 4:37:14 AM] [ERROR] There are no tuners associated with 41.1 : KPDF-HD - 37C = { (41.1 : KPDF-HD - 2B8) + [ ] } . Deleting channel.
52 [3/2/2018 12:15:20 AM] [ERROR] SD API WebException Thrown. Message: The remote name could not be resolved: 'json.schedulesdirect.org' , Status: NameResolutionFailure
53 [3/2/2018 12:15:20 AM] [ERROR] Did not receive a response from Schedules Direct for a token request.
54 [3/2/2018 12:15:20 AM] [ERROR] Failed to retrieve token from Schedules Direct. message: Did not receive a response from Schedules Direct for a token request.
55 [3/18/2018 12:15:38 AM] [ERROR] SD API WebException Thrown. Message: The underlying connection was closed: An unexpected error occurred on a receive. , Status: ReceiveFailure
56 [3/18/2018 12:15:38 AM] [ERROR] Did not receive a response from Schedules Direct for a token request.
57 [3/18/2018 12:15:38 AM] [ERROR] Failed to retrieve token from Schedules Direct. message: Did not receive a response from Schedules Direct for a token request.
58 [3/22/2018 8:01:12 AM] [ERROR] There are no tuners associated with 36.4 : KAZTCD4 - 46C46D = { (36.4 : KAZTCD4 - 46C468) + [ ] } . Deleting channel.
59 [4/23/2018 3:49:18 AM] [ERROR] The operation was canceled by the user
60 [6/5/2018 12:15:08 AM] [ERROR] SD API WebException Thrown. Message: The remote server returned an error: (500) Internal Server Error. , Status: ProtocolError
61 [6/5/2018 12:15:08 AM] [ERROR] Did not receive a response from Schedules Direct for a token request.
62 [6/5/2018 12:15:08 AM] [ERROR] Failed to retrieve token from Schedules Direct. message: Did not receive a response from Schedules Direct for a token request.
===== QUERY INFORMATION (Predefined) ===========================
File Name: OK_TO_DELETE_Merged Log
Search String: [ERROR]
Date Range: 02/05/2017 thru 09/08/2018
Total results found: 62
Query time: 56 seconds
===== GENERAL INFORMATION ======================================
Total lines processed: 43845
Logfile timespan: 2/5/2017 thru 9/8/2018
Hats off to EPG123 and garyan2!