Page 2 of 3

Re: Any success with Windows 10 1909?

Posted: Tue Dec 10, 2019 8:16 pm
by Rik007
Running WMC 8.8.4 with anysee. Until now no issues. Fantastic job!

Re: Any success with Windows 10 1909?

Posted: Tue Dec 10, 2019 11:26 pm
by twegner
Because I am completely insane, and have a solid backup system, I applied today's (12/10/2019) cumulative update on my WMC HTPC on Windows 10 1909 with EGP123. I held my breath, and after I rebooted WMC seems to be running fine.

I do have one nagging annoyance that is related to Windows 10 and likely has nothing to do with WMC. My HTPC is connected to a Sony TV via HDMI which includes both video and sound. Sometimes when I start the system the audio is not recognized. A reboot always gets the sound on. I never saw this with Windows 7. I can live with it.

Re: Any success with Windows 10 1909?

Posted: Wed Dec 11, 2019 3:40 am
by edlegs
twegner wrote: Tue Dec 10, 2019 11:26 pm Because I am completely insane, and have a solid backup system, I applied today's (12/10/2019) cumulative update on my WMC HTPC on Windows 10 1909 with EGP123. I held my breath, and after I rebooted WMC seems to be running fine.

I do have one nagging annoyance that is related to Windows 10 and likely has nothing to do with WMC. My HTPC is connected to a Sony TV via HDMI which includes both video and sound. Sometimes when I start the system the audio is not recognized. A reboot always gets the sound on. I never saw this with Windows 7. I can live with it.
I see this same issue frequently with my Win7 machine. I've found I can also unplug/re-plug the HDMI cable from/to the PC if I don't want to bother with a restart.

Re: Any success with Windows 10 1909?

Posted: Wed Dec 11, 2019 9:25 am
by technodevotee
HDMI initialization issues seem to have been worse for me since getting a Sony Smart TV as well: Sometimes there's no picture and sometimes there's no sound when starting up.

There is an A/V Amp between the HTPC and the TV but I moved my old HTPC and Samsung Smart TV to another room and connected them directly to each other and that isn't perfect either.

I have often wondered if it is poor quality cables preventing proper handshaking.

Re: Any success with Windows 10 1909?

Posted: Wed Dec 11, 2019 3:28 pm
by jachin99
I can't quote anyone directly but I have heard of others having much better luck with high quality HDMI cables. It's especially bad on long cable runs.

Re: Any success with Windows 10 1909?

Posted: Wed Dec 11, 2019 8:16 pm
by twegner
Even though triggered by an offhand comment about HDMI on my part, I appreciated the several comments about HDMI cables. I have a very short cable, certainly not a high quality one. I unplugged both ends, plugged in again, connected securely, and for good measure switched from the Sony HDMI 2 port to HDMI 1. So far so good. The computer and the TV also have a VGA, but I vaguely recall this didn't work as well as HDMI, not to mention I would have to also connect audio cables. We shall see. I used to run the HTPC 24/7, which would likely eliminate this problem, but more recently have been turning it off if nothing to record. My experience has been that once I have sound, it stays on until the next time I turn the computer off and then on again. (later) Nope, audio was off again when HTPC started, but reboot fixed it. I think I'll stop worrying about it as long as the reboot always works.

Back to the original topic, I will probably keep rashly applying cumulative updates, but will be very very cautious when we get to the 2020 feature update, since the experience here is they often break WMC. From what I understand, the 1909 was unusually small and not like the usual Windows 10 feature update.

Re: Any success with Windows 10 1909?

Posted: Wed Dec 11, 2019 10:26 pm
by technodevotee
I'm running the latest insider build of 2004 on one of my testbed PCs and WMC still works fine once I've rolled back the updated DLLs and reinstated the missing DLLs and registry entries using my utility.

Re: Any success with Windows 10 1909?

Posted: Wed Dec 18, 2019 2:48 am
by twegner
RE the problem I was experiencing with Windows 10 HTPC not recognizing the Sony HDMI Audio. While it always worked to start the computer, and then reboot, it turns out that the root cause was Windows 10's fast startup feature. You can turn this off with Control Panel->Hardware and Sound-Power Options-> Choose What the Power Buttons Do (menu on left) Then clear the checkbox "Turn On Fast Startup (Recommended)" After I did this, the Sony HDMI audio was recognized every time when the computer is started. I hope this helps others. I was almost ready to go back to Windows 7 for running WMC, but now that the HDMI audio problem is fixed, I feel better about Windows 10!

Re: Any success with Windows 10 1909?

Posted: Wed Dec 18, 2019 7:14 am
by technodevotee
Thanks for updating us. Glad it is working better for you.

I always turn off fast start up as it causes problems for me on every PC I have.

IMHO, it really isn't worth having just for the sake of 10-15 seconds.

Re: Any success with Windows 10 1909?

Posted: Thu Dec 26, 2019 7:14 pm
by jppl2000
Hello, I have version 1909 of Windows 10. I have an infinitv6 tuner(s). It used to work in Windows 7 but strangely went south. The Ceton diagnostic detects all in Win 10 but WMC does not detect tuners. At this point what should I do? Thanks, JIM

Re: Any success with Windows 10 1909?

Posted: Mon Dec 30, 2019 2:13 pm
by rogoued
My setup is PC->HDMI->Denon Receiver->DVI to Monitor (No sound an old Pioneer DUMB Plasma)
Most of the time when I wake up the PC and the monitor there is no video, I am guessing this is because of the DVI handshake to the Denon receiver?
My other issue is that the sound on the PC itself is OK, but when I play a recorded show the sound goes sky high - is there a way to get these balanced in one level?? TIA

Re: Any success with Windows 10 1909?

Posted: Tue Dec 31, 2019 2:22 pm
by technodevotee
rogoued wrote: Mon Dec 30, 2019 2:13 pm My setup is PC->HDMI->Denon Receiver->DVI to Monitor (No sound an old Pioneer DUMB Plasma)
Most of the time when I wake up the PC and the monitor there is no video, I am guessing this is because of the DVI handshake to the Denon receiver?
My other issue is that the sound on the PC itself is OK, but when I play a recorded show the sound goes sky high - is there a way to get these balanced in one level?? TIA
This doesn't really help but:

I have PC > Onkyo A/V Amp > Sony Smart TV (all HDMI) which was working pretty well but coming out of standby seems to have been really problematic since 1909 was installed.

Sometimes there's no picture and sometimes there's no sound and I have to shut everything down and start again.

Different hardware I know but definitely seems like issues have been worse since 1909.

Can't help with sound problems either I'm afraid but It certainly sounds like a handshaking problem.

I assume you tried turning off fast startup?

Re: Any success with Windows 10 1909?

Posted: Tue Dec 31, 2019 2:42 pm
by rogoued
technodevotee wrote: Tue Dec 31, 2019 2:22 pm
rogoued wrote: Mon Dec 30, 2019 2:13 pm My setup is PC->HDMI->Denon Receiver->DVI to Monitor (No sound an old Pioneer DUMB Plasma)
Most of the time when I wake up the PC and the monitor there is no video, I am guessing this is because of the DVI handshake to the Denon receiver?
My other issue is that the sound on the PC itself is OK, but when I play a recorded show the sound goes sky high - is there a way to get these balanced in one level?? TIA
This doesn't really help but:

I have PC > Onkyo A/V Amp > Sony Smart TV (all HDMI) which was working pretty well but coming out of standby seems to have been really problematic since 1909 was installed.

Sometimes there's no picture and sometimes there's no sound and I have to shut everything down and start again.

Different hardware I know but definitely seems like issues have been worse since 1909.

Can't help with sound problems either I'm afraid but It certainly sounds like a handshaking problem.

I assume you tried turning off fast startup?
It is strange that there are two levels to the sound, but honestly, we do not need sound when moving around the WMC menu, so we left the sound at the level that is good for watching shows. So that has been "solved", though I do not know if this issue is new or not as we moved to this setup as part of my move to Windows 10. Before we had audio coming from a separate SP/DIF channel on our old PC.
In regards to the blank screen, yeah it can be annoying but the plan now is to just quit WMC with a keyboard. I will add a Quit WMC to the Logitech remote, but I am in no rush.

Many thanks!

Re: Any success with Windows 10 1909?

Posted: Tue Dec 31, 2019 3:17 pm
by technodevotee
A lot of people find that having navigation sounds enabled in WMC causes problems. It seems that Windows can't handle multiple audio streams of different formats simultaneously.

It drives my A/V amp nuts - long delays before I get sound and speaker relays clicking and clunking so I have them turned off.

Re: Any success with Windows 10 1909?

Posted: Tue Feb 04, 2020 11:38 am
by shpitz461
If your 'Fast Startup' option is missing from the power menu that's most likely because hibernation is turned off (which is in my case). To disable hibernate run the following command as admin:

Code: Select all

powercfg /h off

Re: Any success with Windows 10 1909?

Posted: Wed Feb 12, 2020 8:20 pm
by twegner
Today's Windows update (2/12/2020) broke my Windows 10 1909 WMC setup. I have been using technodevotee's 64 bit WMC-13 happily and bravely applying Windows updates as they come out since I have a very thorough backup scheme and figure I can recover if anything breaks. The symptom was that as soon as I attempted to play live TV, WMC would crash with a message saying that Windows Media Center had stopped and this was being reported to Microsoft.

I was just about ready to restore my backup from yesterday, which it occurred to me to try running technodevotees replace_dlls.cmd script that comes with his WMC distribution. Voila! Problem cured. So (as I guess is well known by the more experienced folks here), some Windows updates restore the dlls that our WMC setups need replaced. Thankfully in this case the replace_dlls scrip saved the day. So with this caveat, I have WMC running well on the up-to-the-minute Windows 10 1909.

I certainly don't recommend applying Windows updates aggressively like I do, but I'm happy to be the sacrificial lamb. Sooner or later my luck will run out, and I'll have to restore an earlier working version from backup. For now I'll just continue to be amazed that WMC still works and thankful for the technical support in this forum!

Re: Any success with Windows 10 1909?

Posted: Wed Feb 12, 2020 10:42 pm
by technodevotee
Yeah, we have to go though this rigmarole every now and then with V13.

Always worth having a look to see what version the DLLs are before doing anything too drastic. They need to be nn.n.16299.15 or earlier for WMC to work perfectly.

With V13, WMC use the DLLs in system32 and you can check them with list_dlls.cmd.

With V8.8.x, WMC uses the DLLs in ehome and/or system32 (depending on which version you have) and you can check them using option 0 in WMC Multi Tool.

As described elsewhere, WMC V13 still works after build 18958 (so that includes insider versions of 2004, which I guess isn't that far away) but you need to run fix_MSSQLLite.cmd in addition to the other ones.

Lord only knows what they'll change next.

Re: Any success with Windows 10 1909?

Posted: Sat Mar 07, 2020 12:03 am
by sdowney717
just upgraded from 1903 pro to 1909 pro. WMC 8.8.4 working fine with no need to reinstall.

Re: Any success with Windows 10 1909?

Posted: Sat Mar 07, 2020 4:53 am
by technodevotee
Yep.

1903>1909 doesn't really do very much at all.

Re: Any success with Windows 10 1909?

Posted: Sun Mar 08, 2020 12:17 pm
by sdowney717
1903 to 1909 does not involve a lot of change in the files, it is flipping software switches, turning on features.