A New Project for Modern WMC Development
-
- Posts: 568
- Joined: Sun Jun 12, 2011 7:12 pm
- Location: Cumming,GA
- HTPC Specs:
I only have one thing that doesn.t work and that the DTBAddin that handles the commercial skip in Media Center. I have been unsuccessful at getting into installs on Windows 10 as the installer wants Windows 7. I have moved away from DirecTV and the HD-PVR set up I was using and gone to OTA and some IPTV to fill in the holes for certain things.
- Crash2009
- Posts: 4357
- Joined: Thu May 17, 2012 12:38 am
- Location: Ann Arbor, Michigan
- HTPC Specs:
Have you tried this one? It worked for Ceton Echo Extender software that refused to run in Win10.Venom51 wrote: I have been unsuccessful at getting into installs on Windows 10 as the installer wants Windows 7.
Code: Select all
%windir%\ehome\registermceapp.exe /allusers "C:\Program Files\Ceton\Echo\Ceton.Echo.AddIn.xml" /u
%windir%\ehome\registermceapp.exe /allusers "C:\Program Files\Ceton\Echo\Ceton.Echo.AddIn.xml"
pause
https://forums.mydigitallife.net/thread ... st-1245208
-
- Posts: 568
- Joined: Sun Jun 12, 2011 7:12 pm
- Location: Cumming,GA
- HTPC Specs:
I did that for some other packages I use but I'll hve to revisit it for the DTBAddin.Crash2009 wrote:Have you tried this one? It worked for Ceton Echo Extender software that refused to run in Win10.Venom51 wrote: I have been unsuccessful at getting into installs on Windows 10 as the installer wants Windows 7.
Code: Select all
%windir%\ehome\registermceapp.exe /allusers "C:\Program Files\Ceton\Echo\Ceton.Echo.AddIn.xml" /u %windir%\ehome\registermceapp.exe /allusers "C:\Program Files\Ceton\Echo\Ceton.Echo.AddIn.xml" pause
https://forums.mydigitallife.net/thread ... st-1245208
- Crash2009
- Posts: 4357
- Joined: Thu May 17, 2012 12:38 am
- Location: Ann Arbor, Michigan
- HTPC Specs:
Not sure if you are working with the same thing I was. What I did was I opened up the EXE in WinRAR..... then I opened up the cab file within the EXE ( also with WinRAR)..... when I opened up the cab file this revealed the add in. As soon as I posted my results within a minute or two TS had uploaded a new EXC for the Ceton Echo. This kind of stuff is mostly over my head, but what I would suggest is open up the DTB setup file with WinRAR then open up the cab with WinRAR. The add in you want might be inside the cab.
The link I sent you in the previous post..... go back 4 or 5 posts where I asked the question.
I unknowingly found the key, TS new which lock to try the key in.
The link I sent you in the previous post..... go back 4 or 5 posts where I asked the question.
I unknowingly found the key, TS new which lock to try the key in.
-
- Posts: 568
- Joined: Sun Jun 12, 2011 7:12 pm
- Location: Cumming,GA
- HTPC Specs:
There may be some dll's I need to register. The addin shows up but crashes shortly after launch.
- Crash2009
- Posts: 4357
- Joined: Thu May 17, 2012 12:38 am
- Location: Ann Arbor, Michigan
- HTPC Specs:
I have no experience with RegSvrVenom51 wrote:There may be some dll's I need to register. The addin shows up but crashes shortly after launch.
https://www.wikihow.com/Register-a-DLL
TestRights has higher copy privileges than admin
Looks like my addin.dll is in the same place as the addin.xml
-
- Posts: 1294
- Joined: Wed Feb 24, 2016 3:36 pm
- Location:
- HTPC Specs:
If your having trouble registering .dlls you should probably ask around quite a bit. I had a similar issue in this thread https://emby.media/community/index.php? ... eam/page-1 I remember after reading the thread that I had to register my assemblies using gacutil.exe, and the version numbers had to match up. I also know that .dlls live in both .net folders, with each .net version having its own folder, as well is in places such as the system folder.
- Crash2009
- Posts: 4357
- Joined: Thu May 17, 2012 12:38 am
- Location: Ann Arbor, Michigan
- HTPC Specs:
This one might be more than you need. The RDP Project required that I replace ehshell and mediacenter.ui
The replacement required that the 2 dll's be UN and RE installed using ngen
This code was used on Win10 2015 10586.0
Maybe somebody with a "Big Brain" can tell us if any of that is of any use to you.
The replacement required that the 2 dll's be UN and RE installed using ngen
This code was used on Win10 2015 10586.0
Code: Select all
copy /y ehshell.dll %SystemRoot%\ehome
copy /y ehshell.dll %SystemRoot%\WinSxS\msil_ehshell_31bf3856ad364e35_6.3.9600.16384_none_203618765d3591ad
copy /y ehshell.dll %SystemRoot%\Microsoft.NET\assembly\GAC_MSIL\ehshell\v4.0_6.3.0.0__31bf3856ad364e35
copy /y Microsoft.MediaCenter.UI.dll %SystemRoot%\ehome
copy /y Microsoft.MediaCenter.UI.dll %SystemRoot%\WinSxS\msil_microsoft.mediacenter.ui_31bf3856ad364e35_6.3.9600.16384_none_c7c20add72ce055d
copy /y Microsoft.MediaCenter.UI.dll %SystemRoot%\Microsoft.NET\assembly\GAC_MSIL\Microsoft.MediaCenter.UI\v4.0_6.3.0.0__31bf3856ad364e35
Code: Select all
set _ngen=%windir%\Microsoft.NET\Framework64\v4.0.30319\ngen.exe
%_ngen% uninstall "ehshell, Version=6.3.0.0, Culture=Neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=msil"
%_ngen% uninstall "Microsoft.MediaCenter.UI, Version=6.3.0.0, Culture=Neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=msil"
%_ngen% install "ehshell, Version=6.3.0.0, Culture=Neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=msil" /NoDependencies /queue:1
%_ngen% install "Microsoft.MediaCenter.UI, Version=6.3.0.0, Culture=Neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=msil" /NoDependencies /queue:1
set _ngen=%windir%\Microsoft.NET\Framework\v4.0.30319\ngen.exe
%_ngen% uninstall "Microsoft.MediaCenter.UI, Version=6.3.0.0, Culture=Neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=msil"
%_ngen% install "Microsoft.MediaCenter.UI, Version=6.3.0.0, Culture=Neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=msil" /NoDependencies /queue:1
- Crash2009
- Posts: 4357
- Joined: Thu May 17, 2012 12:38 am
- Location: Ann Arbor, Michigan
- HTPC Specs:
I downloaded DTBAddin 1.0.0.7 R3
Unblocked the zip, extracted to default, then right clicked W7DTBAddinSetupX64.
I can see the dll's, but so far I have been unable to extract them...WinRar errors out with file corrupt.
I see there is a newer version for W8.
Win 10 uses the WMC from W8.1
Unblocked the zip, extracted to default, then right clicked W7DTBAddinSetupX64.
I can see the dll's, but so far I have been unable to extract them...WinRar errors out with file corrupt.
I see there is a newer version for W8.
Win 10 uses the WMC from W8.1
- Crash2009
- Posts: 4357
- Joined: Thu May 17, 2012 12:38 am
- Location: Ann Arbor, Michigan
- HTPC Specs:
https://emby.media/community/index.php? ... y-working/
Win10 Programs and Features.....Enable .Net 3.5
Win10 Programs and Features.....Enable .Net 3.5
- DavidinCT
- Posts: 1556
- Joined: Mon Feb 13, 2012 3:45 pm
- Location:
- HTPC Specs:
Last night was the first time I played with you ModernMedia UI app. Wanted to see how well it worked in my case.
So, last night I tried to enable your "High Resolution Support" Selected "On" rebooted my HTPC (as I run my HTPC at 4K) and when WMC started up, I still get the message "Your Resolution is too high for WMC" So it's not working for me. I did update it to your newest version.
And your Live TV buffer does not read the registry to show the time set. I changed it manually for 4 hours of record time (I can provide the script I use to enable larger time if needed) and after a reboot, I opened your app and it still shows 120min. The little script I have (hta file) will read the registry and show the current time set, so after I checked your App showing 120min, I opened my HTA file and it showed 4 hours set.
Just my views and my test process so far...
So, last night I tried to enable your "High Resolution Support" Selected "On" rebooted my HTPC (as I run my HTPC at 4K) and when WMC started up, I still get the message "Your Resolution is too high for WMC" So it's not working for me. I did update it to your newest version.
And your Live TV buffer does not read the registry to show the time set. I changed it manually for 4 hours of record time (I can provide the script I use to enable larger time if needed) and after a reboot, I opened your app and it still shows 120min. The little script I have (hta file) will read the registry and show the current time set, so after I checked your App showing 120min, I opened my HTA file and it showed 4 hours set.
Just my views and my test process so far...
-Dave
Twitter @TheCoolDave
Windows Media Center certified and WMC MVP 2010 - 2012
Twitter @TheCoolDave
Windows Media Center certified and WMC MVP 2010 - 2012
-
- Posts: 2840
- Joined: Sun Jun 02, 2013 9:44 pm
- Location:
- HTPC Specs:
If I recall correctly, there are actually at least two registry parameters that can be set for the Live TV buffer.
One is the number of "blocks" to use for the buffer, the other is the size of each of those "blocks".
It is possible that the script you are using is setting the size of the "blocks" instead of the number of "blocks" to change the buffer size, whereas MMUI app is only checking the number of "blocks" (and assuming a default block size) to calculate the current buffer size. Just a guess, though...
One is the number of "blocks" to use for the buffer, the other is the size of each of those "blocks".
It is possible that the script you are using is setting the size of the "blocks" instead of the number of "blocks" to change the buffer size, whereas MMUI app is only checking the number of "blocks" (and assuming a default block size) to calculate the current buffer size. Just a guess, though...
- W10MC
- Posts: 129
- Joined: Mon Aug 01, 2016 7:45 am
- Location:
- HTPC Specs:
viewtopic.php?p=123840#p123840DavidinCT wrote:Last night was the first time I played with you ModernMedia UI app. Wanted to see how well it worked in my case.
- IT Troll
- Posts: 1192
- Joined: Sun Nov 27, 2011 9:42 am
- Location: Edinburgh, UK
- HTPC Specs:
I had completely missed this because I had pretty much given up on WMC10, thinking it more trouble than it is worth. But this is very interesting, especially as it also supports Win 7/8. Perhaps it needs a mention in those forums too?W10MC wrote:Here is a sample showing program information. For those using EPG123, it is possible to display additional data depending on what is available in the feed from Schedules Direct and whether it is practical for Gary to incorporate.
The UI+ looks quite similar to the theme I have been running for several years now. So it gets my vote!
Are you a Recorded TV HD user or want to give it a try? Check out the new community-made update; Recorded TV HD v2.1.1
- W10MC
- Posts: 129
- Joined: Mon Aug 01, 2016 7:45 am
- Location:
- HTPC Specs:
Thanks! Feel free to spread the word. Great things are on the way!IT Troll wrote:I had completely missed this because I had pretty much given up on WMC10, thinking it more trouble than it is worth. But this is very interesting, especially as it also supports Win 7/8. Perhaps it needs a mention in those forums too?
The UI+ looks quite similar to the theme I have been running for several years now. So it gets my vote!
- DavidinCT
- Posts: 1556
- Joined: Mon Feb 13, 2012 3:45 pm
- Location:
- HTPC Specs:
What theme are you running btw ?IT Troll wrote:I had completely missed this because I had pretty much given up on WMC10, thinking it more trouble than it is worth. But this is very interesting, especially as it also supports Win 7/8. Perhaps it needs a mention in those forums too?W10MC wrote:Here is a sample showing program information. For those using EPG123, it is possible to display additional data depending on what is available in the feed from Schedules Direct and whether it is practical for Gary to incorporate.
The UI+ looks quite similar to the theme I have been running for several years now. So it gets my vote!
-Dave
Twitter @TheCoolDave
Windows Media Center certified and WMC MVP 2010 - 2012
Twitter @TheCoolDave
Windows Media Center certified and WMC MVP 2010 - 2012
- IT Troll
- Posts: 1192
- Joined: Sun Nov 27, 2011 9:42 am
- Location: Edinburgh, UK
- HTPC Specs:
A customised version of the Modern8 Metro theme. I made it more monochrome and changed some of the image elements.DavidinCT wrote:What theme are you running btw ?
viewtopic.php?p=100927#p100927
This is achieved using the Media Center Themer tool created by Patchou. With this, it is possible to customise the look of almost anything in Media Center, without modifying any system files. Annoyingly though, one thing you cannot change is the "no focus" colour of icons in any add-in / custom menu strips. It seems that Media Center is hardcoded to give these a blue tint.
I am interested to see if this project can find a solution to this.
Are you a Recorded TV HD user or want to give it a try? Check out the new community-made update; Recorded TV HD v2.1.1
- DavidinCT
- Posts: 1556
- Joined: Mon Feb 13, 2012 3:45 pm
- Location:
- HTPC Specs:
Oh, yea, I remember, now, I asked if you had a copy to downloadIT Troll wrote:A customised version of the Modern8 Metro theme. I made it more monochrome and changed some of the image elements.DavidinCT wrote:What theme are you running btw ?
viewtopic.php?p=100927#p100927
This is achieved using the Media Center Themer tool created by Patchou. With this, it is possible to customise the look of almost anything in Media Center, without modifying any system files. Annoyingly though, one thing you cannot change is the "no focus" colour of icons in any add-in / custom menu strips. It seems that Media Center is hardcoded to give these a blue tint.
I am interested to see if this project can find a solution to this.
I need to spend some time with it and tweak it, I want a really dark but, good looking theme to try..
-Dave
Twitter @TheCoolDave
Windows Media Center certified and WMC MVP 2010 - 2012
Twitter @TheCoolDave
Windows Media Center certified and WMC MVP 2010 - 2012
-
- Posts: 53
- Joined: Thu Mar 01, 2012 10:37 pm
- Location:
- HTPC Specs:
Did you ever try Astrotoy's Black Theme? (I think that was the name??)
-
- Posts: 158
- Joined: Sun Dec 24, 2017 6:14 pm
- Location:
- HTPC Specs:
Is this project considered the continuing development to get WMC working on the newest versions of Win10?
Or is it just tweaking the WMC that already works on older versions of Win10?
Or is it just tweaking the WMC that already works on older versions of Win10?