Infintv Tuners not detected anymore
Posted: Sun Jun 03, 2018 2:51 am
I've been using a PCI- 4 tuner for 7+ years now. I upgraded to a 6 tuner this month because the prices worked out. My original setup had 3 tuners in the host PC and 1 tuner in another PC through the network. I replaced the cards and did TV setup and the 6 tuners worked flawlessly on the host. Then I moved onto setting up the network so I can have the tuners to different PC's. I run the steps and afterwards it says it is complete. Then I go to make sure the 4 tuners are good on the host and I get that a tuner is not detected. I try to reset the network and clear tuners, but neither work. Next I put the 4 back in, but same issue. Then I replaced my hard drive (I just upgraded to an SSD so had the old hard drive intact still). The same issue with the 4 and the 6. With the 6, the PC recognized the card was in there, because it downloaded the new driver it needed. But in WMC, nothing detected. I then tried the hard drive in a different computer with the 4 tuner. Same problem. I would say it is the card, but both are giving me the same issue. Could it be something with the cable card? Any thoughts? Thanks!