I'm running WMC on Win 7 with EPG123 and a Ceton InfiniTV 4 and have been using WMC for at least a decade (pre-Win 7).

For the less technically inclined, is there a Wiki or Guide on how to move to Win 10 and get it working reliably?

If that's not possible at this point, is there a roadmap for...

My computer wants to upgrade to windows 1903 from 1803, but for some reason it says it can not.

From what I read about the upgrade to 1903 and most of the information I did not understand, Is it best if I let it alone and just use 1803, WMC is running just great and I would rather not have any...

For ModernMedia UI+, if my EPG123 installation is at c:\EPG123\ and the files are outputted to c:\EPG123\Output, which of these paths should be entered into the Load Supplemental Program Data from EPG123

Thank you!

Hi there.
I have an older HTPC case from Silverstone that has a built in IR receiver and touchscreen. Here it is:
IMG_20191018_111732.jpg

The IR sensor built in to the Silverstone case I am sure used to come up as a 'Microsoft eHome Infrared Transceiver' under win7/8.

Under win10 I see no...

I had WMC installation working on Windows 10 1511 (just been sitting there on an SSD for a long time, I generally use Windows 7), and I decided to try upgrading in to 1903 using technodevotee's files. Perhaps something was missing in my backup/restore procedure, but clearly I have a registry error....

Installed WMC 8.8.4 on new installation of Win 10 Pro 1903. Without adding any media libraries to WMC, my external D:\ drive shows up as a folder in Pictures & in Videos. I went to Windows Media Player and removed the D:\ drive from there. But that didn't fix the problem. Checked all WMC>Settings...

I just installed windows media center on Windows 10 Home 1903 per @technodevotee 's post on 6/14/2019. I put it on a laptop with 2.1GHz Core i3-5010U processor with 4GB of RAM and a 500GB, 5,400-rpm hard drive. I am using a 2 tuner HDhomerun tuner.

When I use the HDhomerun app to watch tv it runs...

I want to add a qam channel, but I need to find the actual channel number, not the virtual channel. YouTube has a couple old videos with a link on SiliconDust that has the channels, but they only have them for Antenna's now, not qam.

How do I find the channel number for a local station/

Hi,

Long-time WMC and EPG123 user here, first time back to GreenButton in a while (many thanks to Holidayboy for helping me re-establish my account).

Anyway, I've been on CableCard tuners for about a decade, now using a Ceton InfiniTV 6 ETH (network CC tuner) with multiple Win7 boxes, and I'm...

Hello,
After installed WMC10 on W10-64, when launching first, I have message box : Windows cannot open this program because it has been prevented by a software restriction policy. For more information, cotact your system administrator .
I found some information to change something in the registry....

Hello, I have discovered a thing which I only can describe as a database problem. I use WMC since very log time, I think since Vista, I think I even did first experiments with it with the XP MCE edition, but there it still was not usefull for me as it did not have DVB-S card support. So I have...

Hello, I have installed WMC 8.8.4 on Win 10 1903. I have a twin DVBs card and it is setup to work with WMC. It does record TV fine from epg. But for live TV the card is always busy, even if there is currently no recording. It looks like the recording service always takes the TV card and never ends....

Hello, I have a problem with WMC 884 on 1903. I think I had the same problem previously for another reinstall after Win 10 upgrade. As far as I remembver I had to do some commands to reset something. But I don't remember anymore what.

The problem is that I have added some recording jobs by using...

I just installed WMC in Win 10 x64 with no problems.

I'm using ETH tuners with my main HTPC machine.

I'd like to get it running on this PC.

The Win 7 drivers would not install - there's a check for Win 7 SP1.

The Win 8 Beta drivers installed but Ceton's diagnostic says they're not installed in...

in windows 7 there was a thumb nail picture sample with each recorded tv listing. all I am seeing in the windows 10 version is the name of the program where that thumbnail would be. is this by design or is there something I need to set to make that work?

I’m sure that a lot of people have had this happen:
WMC reports Windows Media Center has corrected a problem with your recording data and will download the Guide again. You should review your recordings to verify they are still scheduled correctly.

It then rebuilds the database and you get no...

When my PC was running Win7, the Emby app within WMC worked really well to stream movies from my server PC. Now that I've upgraded to Win 10 1903 and running WMC 8.8.3, I'm wondering if anyone has any experience if this app works with 8.8.3? Since officially WMC isn't made for Win 10, I wanted ask...

I want to upgrade my Win7 HTPC to Win10 but keep WMC.

Experimenting, I installed the WMC for Win10 on my Win10 PC with no problems. I attached my Hauppage WinTV Dual HD USB adapter, connected to an antenna. (This device works on my Win7 installation.) Installed drivers for the Hauppage and...

For a long time I used WMC with my Quad WebTV device - it worked great. When I upgraded Windows to the 1903 update it stopped working. WMC just says that it can't find any device. The WinTV works fine.
Has anyone been able to use WMC with the Quad WebTV device. If yes, what version of WMC are you...

I just installed WMC to my new windows 10 desktop computer. Everything went fine. I ran the channel search on my over the air antenna an came up with 25 channels. When I try to run the guide it says no internet connection. I have xfinity high speed internet. I have the new WinTV tuner with 4...

Howdy,

My Win10 machine updated and broke WMC. It's a Lenovo stick 300.
I caught up on WMC/Win10 and found 8.8.1. Looked promising (I don't need tuners).

Well, it's only for 64 bit. The stick 300 seems to be *not* a good idea to update to 64 bit.

So, what do I do now? What is the latest version...

I'm going to have to move to Windows 10 soon. To get the latest USB 3.1 ports requires a motherboard that only runs Windows 10 since the USB drivers are not available for Windows 7.

This means I've started looking for a WMC replacement that'll run under Windows 10.

I've found this:

Does anyone...