It was suggested my another person to place this question here.

I have had WMC and EPG123 on my computer at least 3 years thanks to Gary

Had a few problems but reading on here I was able to correct it, Before Christmas I got on green button and was catching up and I seen the topics on EPG123 up...

I recently upgtaded to Win10 (and WMC on that) from Win7. Never had this problem on Win7:

HTPC is connected to TV via HDMI. So audio output goes out to TV.
When I switched off the TV last night going to bed, the audio out defaulted to PC speaker. Since we don't switch off WMC overnight (as some...

I just installed WMC on a new Win 10 machine.

I have these Ethernet attached tuners:
(1) SiliconDust HDHomeRun Prime (for cable reception, 3 tuners)
(2) SiliconDust HDHomeRun Dual (for OTA reception, 2 tuners each, 4 total)

I downloaded and ran the HDHomeRun Setup. It sees all 7 tuners.

Inside...

Hi all,

BACKSTORY
I use an old laptop running Windows 10 home as a media center connected to my projector. WMC was working on it but overall system performance was pretty bad with numerous system errors routinely showing in the event logs. So i decided to do a fresh install. I had recently updated...

Hi, somehow my Win7-64 bit system ended up in no-man land Some of MM UI+ is installed (enough to change the look, cause crashes and plaster the evaluation logo on the 7MC screen. But their is no program or GUI for me to select.

I can't find any way to uninstall. I tried removing/reinstalling...

I discovered that there is no sound from the rear and center channel speakers in Windows 10 Media Center unless I start the program playing while still in a window and then expand it to full screen. This is obviously not a huge deal, but if anyone knows of a fix, I'd appreciate it. My Windows 7...

Hi,

I appreciate what your site has done to continue with WMC in windows 10.
Setup:

I have 64 bit windows 10 build 1909 and your WMC version 8.8.4.
My HTPC is hooked up directly to my livingroom TV and is woken up by using my universal remote that wakes up the HTPC, turns on the TV etc. all at...

I just did a clean install of 8.8.4 on 1909 and it's working perfectly (so far ;)) except for one issue... I can't get the remote to work in Windows, it works fine in WMC. I noticed that ehtray.exe does not start by default - if I start it manually, the green button works to launch WMC but then if...

I finally cut the cord. With Windows 7 and WMC support ending combined with me just not able to justify paying for cable for the very few shows I watched, I finally ditched it. I do still have a back log of recorded programs on my Win7 box. I intend to upgrade it to Win10 tonight or tomorrow since...

I just completed a Win10 build on 10586 (to support my Ceton tuners). Everything went well except that the Nvidia installer package for the 2000 series cards does not work with version 10586 (card is not recognized in the system and the installer errors with unsupported version of Windows). Thanks...

A little Background:
I have not been on this forum in many years. So please excuse me for my ignorance.
I currently am running a Windows 7 pro on an Intel i7 box, with the current version of Windows Media Center (all working quite well)
I have a HDHome Run Prime 3 and an internal Ceton...

Fresh Windows 1903, DVD's are in folders , loaded in Movies section. DVD is starting but not playing, playing few seconds with repeating sound and getting video error message. Thank you for your help.

I have gotten Media Center installed in the new Windows 10 PC I recently built, thanks to all of the much-appreciated help in this forum. I have been using it for a few weeks now and it is recording all of the shows without issues. However, I recently discovered that my older programs will not...

Hi, i have just migrated to win 10 from 7 (clean install) have setup WMC-V8.8.4 it appears to be working correctly with the exception of when i go into settings, recorder, to change storage from default c drive
it allows me to select an alternative HD letter but then it just sits there and the...

I'm using Windows 10 1511 and media center themer and it looks to be limited at 5 menu items. How can you add more items or another custom menu?

Have been resisting switching to Windows 10 for a very long time for 2 main reasons...1. It's nothing more than a virus/malware/phishing scam disguised as an OS and 2. Because I didn't want to lose my media center for watching live hd tv ota with my 2 tuner hdhomerun which from what I understand...

I have 6 HDhomerun tuners (3 devices with 2 tuners each) connected to my home network. I have two Win7 machines which play and record from the EPG just fine. My newly built Win10 and WMC-V13_x64 reports all tuners are in use. I verified none of them are playing all are idle. Network is not the...

I live in the metro-Phoenix area and 10 broadcast stations have already committed to the new ATSC 3.0 standard. They have been setting up their transmitters and preparing for the ATSC 3.0 rollout which officially begins on January 1st, 2020. For those not familiar with ATSC 3.0, it's essentially 4K...

For backup restore, where do they go?

And for some reason, WMC after a week of good working, no longer can find a signal for any tuner cards. So I suppose I need to uninstall and reinstall it?
Plays recorded shows, just no live TV.
The TV signal is there as it works on the regular TV off the...

Hello, I am using WMC with 1803 and DVBS2 card. Basically it works. But I can not search for titles or desctiption contents of the EPG for recording. I have set up several keywords to record TV shows by topic, but only one (the 2nd in the priority) in list regulary is found, scheduled and recorded,...

Every time i try to update Playready to watch live tv it says The PlayReady Update was incomplete i have tried lots of methods to no result. any way to fix this? :?:

This is an issue I have run into in the past however, and I tried to manually enter these registry keys on newer versions of WIndows 10 in order to bypass OCUR discovery and activation both of which depend on PlayReady 2. My thought has been that by manually pointing WMC to the correct registry...

Like others, I haven't had any luck getting any version of WMC to start on Windows 10 after insider build 18958 - there is an issue reported with kernelbase.dll which may possibly be insurmountable.

So I installed 1903 on the last of my PCs a few days ago and used gpedit to delay upgrades for a...