I'm using the DVRMSToolbox add-in for RecordedTVHD. On my HTPC I use the VolumeUp command to toggle skipping of commercials, which works fine.
But, the same command does not have any effect on my Echo.
This is configured in in the DVRSToolbox configuration screen.
Has anyone had success finding a mapped key from the configuration tool that works on both the HTPC and Echo? There's a lot of choices in the dropdown box but they don't make a lot of sense as to what key they are.
Turning off commercial skip
Forum rules
Ceton no longer participate in this forum. Official support may still be handled via the Ceton Ticket system.
Ceton no longer participate in this forum. Official support may still be handled via the Ceton Ticket system.
-
- Posts: 287
- Joined: Tue Sep 11, 2012 1:36 am
- Location:
- HTPC Specs:
-
- Posts: 724
- Joined: Tue Aug 21, 2012 10:21 pm
- Location:
- HTPC Specs:
I use "Up", which works fine on the Echo. I used to use "Clear", which worked too.
If anyone knows a command that's not used for navigation but is recognized on the Echo, I would prefer to remap a Harmony color button to that command instead
If anyone knows a command that's not used for navigation but is recognized on the Echo, I would prefer to remap a Harmony color button to that command instead
- rmeden
- Posts: 67
- Joined: Wed Jul 29, 2015 3:39 pm
- Location: Schedules Direct
- HTPC Specs:
I thought the DVRMSToolbox key-bindings stopped working when Media-Pak came out. is it working again?
-
- Posts: 287
- Joined: Tue Sep 11, 2012 1:36 am
- Location:
- HTPC Specs:
I don't know what Media-Pak is. I never had a problem with my HTPC assigning a key to enable/disable commercial skipping. Just on the Echo.
-
- Posts: 287
- Joined: Tue Sep 11, 2012 1:36 am
- Location:
- HTPC Specs:
After much playing around, it looks like 'Up' is the best choice. I did try 'Enter' which was a mistake since it appears that 'Enter' and 'OK' are the sameRyC wrote:I use "Up", which works fine on the Echo. I used to use "Clear", which worked too.
If anyone knows a command that's not used for navigation but is recognized on the Echo, I would prefer to remap a Harmony color button to that command instead
Thanks for the info.