v1.1.3 Release
Forum rules
★ Download the latest EPG123 here: https://garyan2.github.io/ <> Setup guide here: https://garyan2.github.io/install.html ★
★ Download the latest EPG123 here: https://garyan2.github.io/ <> Setup guide here: https://garyan2.github.io/install.html ★
-
- Posts: 246
- Joined: Sun Jul 19, 2015 1:04 am
- Location: Schedules Direct
- HTPC Specs:
Which logos need to be inverted? We (Schedules Direct) are now including inverted / alternate logos (but EPG123 may not be using that feature yet), and I'd like to see how far we still need to go.
- garyan2
- Posts: 7438
- Joined: Fri Nov 27, 2015 7:23 pm
- Location:
- HTPC Specs:
That's been implemented? I set up the code for it, but didn't have anything to try it out on. I'll check it out and see if the code works.rkulagow wrote:Which logos need to be inverted? We (Schedules Direct) are now including inverted / alternate logos (but EPG123 may not be using that feature yet), and I'd like to see how far we still need to go.
- Gary
Keeping WMC alive beyond January 2020. https://garyan2.github.io
Keeping WMC alive beyond January 2020. https://garyan2.github.io
- garyan2
- Posts: 7438
- Joined: Fri Nov 27, 2015 7:23 pm
- Location:
- HTPC Specs:
Just checked, and sure is. My code pulls them down just fine. I am still using the legacy field for station logo as well, so ...
Example: BBCAHD will pull 3 images: BBCAHD.png, BBCAHD-1.png, BBCAHD-2.png
BBCAHD and BBCAHD-1 are the same image. The first being the legacy, the second being the first image of the new structure.
BBCAHD-2 is the inverted colors image.
Example: BBCAHD will pull 3 images: BBCAHD.png, BBCAHD-1.png, BBCAHD-2.png
BBCAHD and BBCAHD-1 are the same image. The first being the legacy, the second being the first image of the new structure.
BBCAHD-2 is the inverted colors image.
- Gary
Keeping WMC alive beyond January 2020. https://garyan2.github.io
Keeping WMC alive beyond January 2020. https://garyan2.github.io
-
- Posts: 221
- Joined: Tue Sep 18, 2012 9:50 pm
- Location:
- HTPC Specs:
I had to go back to 1.11 because I was seeing Media Center lockups and then an error box saying Media Center crashed and a button to restart it. Also, guide updates stopped occurring. The logfile seemed to indicate nothing wrong but the future recordings list kept getting smaller and smaller.
I'm in the process of reverting
During this I saw that if there is a recording going on the mxf import won't occur? Does this mean if there's a recording going on it will not load in the new guide listings?
I'm in the process of reverting
During this I saw that if there is a recording going on the mxf import won't occur? Does this mean if there's a recording going on it will not load in the new guide listings?
- garyan2
- Posts: 7438
- Joined: Fri Nov 27, 2015 7:23 pm
- Location:
- HTPC Specs:
Correct. If a recording is in progress then epg123 will abort the import. It will still update the mxf file so it will be ready if you wish to manually import it.marvin-miller wrote:I had to go back to 1.11 because I was seeing Media Center lockups and then an error box saying Media Center crashed and a button to restart it. Also, guide updates stopped occurring. The logfile seemed to indicate nothing wrong but the future recordings list kept getting smaller and smaller.
I'm in the process of reverting
During this I saw that if there is a recording going on the mxf import won't occur? Does this mean if there's a recording going on it will not load in the new guide listings?
- Gary
Keeping WMC alive beyond January 2020. https://garyan2.github.io
Keeping WMC alive beyond January 2020. https://garyan2.github.io
-
- Posts: 221
- Joined: Tue Sep 18, 2012 9:50 pm
- Location:
- HTPC Specs:
Is there any way to turn that off? (so that it imports even if recording).
-
- Posts: 71
- Joined: Fri Oct 30, 2015 3:56 pm
- Location:
- HTPC Specs:
Nopemarvin-miller wrote:Is there any way to turn that off? (so that it imports even if recording).
-
- Posts: 2838
- Joined: Sun Jun 02, 2013 9:44 pm
- Location:
- HTPC Specs:
Is this a global problem (if you import data while recording it can stop the recording)?
Because I have done guide updates with the standard Rovi data (not EPG123) and I never have had a problem with running it while recordings are in progress.
Because I have done guide updates with the standard Rovi data (not EPG123) and I never have had a problem with running it while recordings are in progress.
- garyan2
- Posts: 7438
- Joined: Fri Nov 27, 2015 7:23 pm
- Location:
- HTPC Specs:
Not global. There have been a couple reports in the last year, and I have managed to duplicate it once. I would say the risk is low. I never knew it would be so difficult for folks to find a couple minutes in the day to perform updates while not recording something.Space wrote:Is this a global problem (if you import data while recording it can stop the recording)?
Because I have done guide updates with the standard Rovi data (not EPG123) and I never have had a problem with running it while recordings are in progress.
FYI: The abort will only be for the scheduled task / command line. A manual import from the client GUI will proceed with the import regardless. I assume that the user knows what they are doing.
- Gary
Keeping WMC alive beyond January 2020. https://garyan2.github.io
Keeping WMC alive beyond January 2020. https://garyan2.github.io
-
- Posts: 221
- Joined: Tue Sep 18, 2012 9:50 pm
- Location:
- HTPC Specs:
In my case my DVR is 'catching' up. This is largely due to the original ROVI issue, the fact that a lot of my previously recorded series have been re-mastered into HD (thus creating a need to re-record them) and also due to hard disk failures. So I'm in the unfortunate position where entire series recordings are been done over again.garyan2 wrote: I never knew it would be so difficult for folks to find a couple minutes in the day to perform updates while not recording something.
As such, it's common for my DVR to be recording 15 or more hours per day at various times.
Question, would it be hard to put a radio button on the EPG GUI that turns this feature on or off?
-
- Posts: 45
- Joined: Thu Nov 10, 2016 2:46 am
- Location:
- HTPC Specs:
I think I had a short trial of 1.1.2 (client and server) and somewhere something went sideways with Media Center and I ended up going back to 1.02 because it was more familiar and I needed it up quickly.
With the client-server version I tried, I know it converted the series for the new setup. But what I did not see a comment on is if it works for shows that are off season or just those available in current guide info from SD. So if for example, "Code Black" is one of my series currently waiting for its next season, and lets assume it is not syndicated yet... Does the conversion / remapping of series know about these not currently airing series or will they need to setup again later?
With the client-server version I tried, I know it converted the series for the new setup. But what I did not see a comment on is if it works for shows that are off season or just those available in current guide info from SD. So if for example, "Code Black" is one of my series currently waiting for its next season, and lets assume it is not syndicated yet... Does the conversion / remapping of series know about these not currently airing series or will they need to setup again later?
- garyan2
- Posts: 7438
- Joined: Fri Nov 27, 2015 7:23 pm
- Location:
- HTPC Specs:
The "upgrade" doesn't affect anything with the scheduled recordings. The change was to the unique ID for the channel in the .mxf file which is basically what attaches a station's listings to the tuner channel.SciFiGeek wrote:I think I had a short trial of 1.1.2 (client and server) and somewhere something went sideways with Media Center and I ended up going back to 1.02 because it was more familiar and I needed it up quickly.
With the client-server version I tried, I know it converted the series for the new setup. But what I did not see a comment on is if it works for shows that are off season or just those available in current guide info from SD. So if for example, "Code Black" is one of my series currently waiting for its next season, and lets assume it is not syndicated yet... Does the conversion / remapping of series know about these not currently airing series or will they need to setup again later?
Scheduled recordings are done by the Series ID, Service ID (station), and channel number. The change to 1.1.x will not impact scheduled series recordings.
- Gary
Keeping WMC alive beyond January 2020. https://garyan2.github.io
Keeping WMC alive beyond January 2020. https://garyan2.github.io
-
- Posts: 63
- Joined: Tue May 12, 2015 5:50 pm
- Location:
- HTPC Specs:
I updated to 1.1.3 and now I'm getting a lot of recordings "began late... due to a temporary failure caused by either a system malfunction or a power loss..."
Also now all channels are selected in epg123 (overwrote my epg123.cfg file)... errr.
1. If I rerun Setup TV Signal do I have to go through the epg123utility steps again?
2. What does Rebuild Database do? Does it wipe out anything such as recorded history, I'm sick of duplicate recordings.
3. Any special instructions to go back to v1.0.2?
If it ain't broke, don't fix it... wish I never updated.
Also now all channels are selected in epg123 (overwrote my epg123.cfg file)... errr.
1. If I rerun Setup TV Signal do I have to go through the epg123utility steps again?
2. What does Rebuild Database do? Does it wipe out anything such as recorded history, I'm sick of duplicate recordings.
3. Any special instructions to go back to v1.0.2?
If it ain't broke, don't fix it... wish I never updated.
- garyan2
- Posts: 7438
- Joined: Fri Nov 27, 2015 7:23 pm
- Location:
- HTPC Specs:
Don't know what is causing this, but it can't be epg123 unless maybe you are performing an update when your recordings are supposed to start and that is upsetting WMC for some reason. EPG123 is not active or resident in memory when it is not performing the update. Something else is going on here.Jim-W wrote:I updated to 1.1.3 and now I'm getting a lot of recordings "began late... due to a temporary failure caused by either a system malfunction or a power loss..."
I'll have to go through my notes to find when this was fixed, but there was a corner case when the Save button was clicked multiple times in the epg123 GUI, then all channels would be selected. The problem may still exist in 1.1.3 and my fix will be in 1.1.4 ... can't remember at the moment.Jim-W wrote:Also now all channels are selected in epg123 (overwrote my epg123.cfg file)... errr.
1. No, not for Setup TV Signal.Jim-W wrote:1. If I rerun Setup TV Signal do I have to go through the epg123utility steps again?
2. What does Rebuild Database do? Does it wipe out anything such as recorded history, I'm sick of duplicate recordings.
3. Any special instructions to go back to v1.0.2?
2. Rebuild database deletes the database then creates a new one and imports the backup 'lineup', 'recordings', and 'subscriptions'... it's really a fresh start with tuners and recordings in place with no guide data. A manual update of the mxf file will fix that. Recorded history, I believe, is in the event log, not the database ... it should be okay.
3. The proper way to go back to 1.0.2 would be to use the epg123utility again. The secret is if you use the 'automatch' feature, you don't need the utility, though you may have to run the update twice to get everything in place.
Don't know why there are recording problems going on, but find it hard to believe epg123 is involved. You might want to check task manager if epg123 is stuck in memory, or a reindex is still running, or something else ...? Sorry it was not a smooth transition for you.
- Gary
Keeping WMC alive beyond January 2020. https://garyan2.github.io
Keeping WMC alive beyond January 2020. https://garyan2.github.io
-
- Posts: 2838
- Joined: Sun Jun 02, 2013 9:44 pm
- Location:
- HTPC Specs:
If you are talking about the per-Series history of recorded episodes that is maintained so that WMC does not record the same episode of a Series twice, then I think it will wipe this out. If you are talking about the log that is called "History" in WMC, then that will not be affected, that is just a subset of the entries that can also be seen in the Windows Event Viewer.garyan2 wrote:...
2. Rebuild database deletes the database then creates a new one and imports the backup 'lineup', 'recordings', and 'subscriptions'... it's really a fresh start with tuners and recordings in place with no guide data. A manual update of the mxf file will fix that. Recorded history, I believe, is in the event log, not the database ... it should be okay.
...
-
- Posts: 63
- Joined: Tue May 12, 2015 5:50 pm
- Location:
- HTPC Specs:
Yes, I'm talking about the per-Series history of recorded episodes that is maintained so that WMC does not record the same episode of a Series twice.Space wrote:If you are talking about the per-Series history of recorded episodes that is maintained so that WMC does not record the same episode of a Series twice, then I think it will wipe this out. If you are talking about the log that is called "History" in WMC, then that will not be affected, that is just a subset of the entries that can also be seen in the Windows Event Viewer.garyan2 wrote:...
2. Rebuild database deletes the database then creates a new one and imports the backup 'lineup', 'recordings', and 'subscriptions'... it's really a fresh start with tuners and recordings in place with no guide data. A manual update of the mxf file will fix that. Recorded history, I believe, is in the event log, not the database ... it should be okay.
...
Thanks
-
- Posts: 721
- Joined: Mon Nov 05, 2012 8:05 pm
- Location: Longmont, CO
- HTPC Specs:
This almost sounds like your system is crashing and rebooting. Have you watched the system when a recording is due to start. Are there any events in your event logs coincident with the time of the message?Jim-W wrote:I updated to 1.1.3 and now I'm getting a lot of recordings "began late... due to a temporary failure caused by either a system malfunction or a power loss..."
-
- Posts: 63
- Joined: Tue May 12, 2015 5:50 pm
- Location:
- HTPC Specs:
Not crashing or rebooting, nothing in the event logs except the began late... warnings. I rebooted today so I'll keep an eye on it. If it keeps doing it I have a Macrium backup image I took before I updated epg123.
Thanks
Thanks
- IT Troll
- Posts: 1172
- Joined: Sun Nov 27, 2011 9:42 am
- Location: Edinburgh, UK
- HTPC Specs:
I had a spate of these "system malfunction" recording problems when I switched to Windows 8. This was before I started to use EPG123. I eventually worked out that it was because the PVR Schedule wasn't being updated correctly. See here for more:
http://www.thegreenbutton.tv/forums/vie ... 54#p101854
BTW, Recording History is in the Event Log but this is just the log. The previously recorded data, used to determine duplicates, still lives in the TV database and would be lost in a reset.
http://www.thegreenbutton.tv/forums/vie ... 54#p101854
BTW, Recording History is in the Event Log but this is just the log. The previously recorded data, used to determine duplicates, still lives in the TV database and would be lost in a reset.
Are you a Recorded TV HD user or want to give it a try? Check out the new community-made update; Recorded TV HD v2.1.1
-
- Posts: 63
- Joined: Tue May 12, 2015 5:50 pm
- Location:
- HTPC Specs:
Thanks for the input!IT Troll wrote:I had a spate of these "system malfunction" recording problems when I switched to Windows 8. This was before I started to use EPG123. I eventually worked out that it was because the PVR Schedule wasn't being updated correctly. See here for more:
http://www.thegreenbutton.tv/forums/vie ... 54#p101854
BTW, Recording History is in the Event Log but this is just the log. The previously recorded data, used to determine duplicates, still lives in the TV database and would be lost in a reset.
It seems to be doing good now on it's own, all I did was reboot yet again. Before I posted this problem I deleted the StartRecording task, ran chkdsk on all drives and ran SFC... now errors or violations but it didn't seem to help.
I tried to run the existing PvrSchedule task in Task Scheduler but it comes up Class not registered so for what it's worth I ran it in an elevated cmd prompt, no errors or message.