PlayReady will not download
-
- Posts: 247
- Joined: Tue Aug 14, 2012 4:03 am
- Location: Atlanta, GA,Ft.Walton BCH,FL
- HTPC Specs:
PlayReady will not download
I have problems w/ W7MC when I click a recorded program then click play it won't play it reverts back to the recorded programs list.
decided to reinstall the W7OS I actually recloned my Samsung SSD have done this a few times over the years.
I gave up attemping to resetup the HTPC now I attemping again here’s where I’m at so far.
I’m convinced the playready is interfering w/ the resetup it simply won’t download found a possible solution from Silicon dust forum board.
Solution 1:
1) Go into Control Panel, click "Uninstall a program", and uninstall "PlayReady PC Runtime".
2) Run Windows Media Center. Update PlayReady by going through Tasks, Settings, TV, TV Signal, Update PlayReady.
Playready still won’t DL
Here are the error codes I get
0x80072EFE
0X80244017
0x80240022
I spent 5 hours and many attemps to DL.
Thanks for any helpful advice. STB
decided to reinstall the W7OS I actually recloned my Samsung SSD have done this a few times over the years.
I gave up attemping to resetup the HTPC now I attemping again here’s where I’m at so far.
I’m convinced the playready is interfering w/ the resetup it simply won’t download found a possible solution from Silicon dust forum board.
Solution 1:
1) Go into Control Panel, click "Uninstall a program", and uninstall "PlayReady PC Runtime".
2) Run Windows Media Center. Update PlayReady by going through Tasks, Settings, TV, TV Signal, Update PlayReady.
Playready still won’t DL
Here are the error codes I get
0x80072EFE
0X80244017
0x80240022
I spent 5 hours and many attemps to DL.
Thanks for any helpful advice. STB
-
- Posts: 1477
- Joined: Mon Aug 20, 2012 6:52 pm
- Location:
- HTPC Specs:
-
- Posts: 247
- Joined: Tue Aug 14, 2012 4:03 am
- Location: Atlanta, GA,Ft.Walton BCH,FL
- HTPC Specs:
thanks Dave I will try you'r advice seams like a easy fix, will report back w/ results.
STB
STB
-
- Posts: 247
- Joined: Tue Aug 14, 2012 4:03 am
- Location: Atlanta, GA,Ft.Walton BCH,FL
- HTPC Specs:
update the clock was incorrect the time zone was set to central America I corrected time and changed zone to US/Canada central, was able to DL Playready however my W7MC is still none functionale
whenever I click a recorded program then click play it won't play it reverts back to the recorded programs list.
STB
whenever I click a recorded program then click play it won't play it reverts back to the recorded programs list.
STB
- STC
- Posts: 6808
- Joined: Mon Jun 06, 2011 4:58 pm
- Location:
- HTPC Specs:
Probably due to having a new set of DRM keys. Do you have any backups of your OS before the problems started?
Does a fresh recording of a premium channel program play back okay?
STC
Does a fresh recording of a premium channel program play back okay?
STC
By the Community, for the Community. 100% Commercial Free.
Want decent guide data back? Check out EPG123
Want decent guide data back? Check out EPG123
-
- Posts: 247
- Joined: Tue Aug 14, 2012 4:03 am
- Location: Atlanta, GA,Ft.Walton BCH,FL
- HTPC Specs:
I actually had the problem so I recloned my orginale HHD (the oringal HDD didn't have any issues) to my C: drive which is a Samsung SSD I've done this a few times over the years however this time it wasn't the solution.STC wrote:Probably due to having a new set of DRM keys. Do you have any backups of your OS before the problems started?
Does a fresh recording of a premium channel program play back okay?
STC
I can't playback anything can't watch live TV
this is the message I get
video files are not installed correctly or are not working restart MC or restart PC restarting resolves nothing.
Thanks for advice STB
-
- Posts: 1477
- Joined: Mon Aug 20, 2012 6:52 pm
- Location:
- HTPC Specs:
I think your issues are due to the files being moved. See this thread:
http://answers.microsoft.com/en-us/wind ... 4549f0d0e9
http://answers.microsoft.com/en-us/wind ... 4549f0d0e9
-
- Posts: 247
- Joined: Tue Aug 14, 2012 4:03 am
- Location: Atlanta, GA,Ft.Walton BCH,FL
- HTPC Specs:
there where many different senarios on that mS site
ms site is very presumptuous that I understand PC terminologly like resistory ect.
I have looked at my w7mc storage locations and they have the same name as the hdds in the pc. like the z drive in W7MC is the ame as in the PC
is this the correct method to verifiy if files have been moved?
I have in the past observed W7MC deciding to change the drives name like W7MC changes the z drive to the H. where I changed back to Z easy fix.
ms site is very presumptuous that I understand PC terminologly like resistory ect.
I have looked at my w7mc storage locations and they have the same name as the hdds in the pc. like the z drive in W7MC is the ame as in the PC
is this the correct method to verifiy if files have been moved?
I have in the past observed W7MC deciding to change the drives name like W7MC changes the z drive to the H. where I changed back to Z easy fix.
-
- Posts: 1477
- Joined: Mon Aug 20, 2012 6:52 pm
- Location:
- HTPC Specs:
There is a setting in WMC where you pick what drive you use for the live buffer. I think you need to de-select whatever it is, and re-select the correct one again. Same goes for all your other recorded TV drives/folders. Something in your config has been corrupted if you can play or record anything. I saw your screenshots in the other thread. They all look ok, but deep in registry could be pointing to the wrong place, hence re-doing the setup may help.
-
- Posts: 247
- Joined: Tue Aug 14, 2012 4:03 am
- Location: Atlanta, GA,Ft.Walton BCH,FL
- HTPC Specs:
Would this be the procedure for
WMC where you pick what drive you use for the live buffer
Tasks/TV/recorder/recorder storage then change this drive?
I’ve never sean a setting for live buffer in WMC.
I’ve actually tried this renaming the storage drive months ago it was’nt the solution then what I did was change the current storage drive to another maybe since all my drives are corrupted this is why it didn't resolve the issue? I will try again.
Also are you saying I need to rename each of my storage HDD in the PC?
Thanks STB
WMC where you pick what drive you use for the live buffer
Tasks/TV/recorder/recorder storage then change this drive?
I’ve never sean a setting for live buffer in WMC.
I’ve actually tried this renaming the storage drive months ago it was’nt the solution then what I did was change the current storage drive to another maybe since all my drives are corrupted this is why it didn't resolve the issue? I will try again.
Also are you saying I need to rename each of my storage HDD in the PC?
Thanks STB
-
- Posts: 721
- Joined: Mon Nov 05, 2012 8:05 pm
- Location: Longmont, CO
- HTPC Specs:
The buffer for live TV is in a subfolder of the location you specify for your recording storage.
-
- Posts: 247
- Joined: Tue Aug 14, 2012 4:03 am
- Location: Atlanta, GA,Ft.Walton BCH,FL
- HTPC Specs:
I’ve never seen a setting for live buffer in WMC.
please provide step by step instructions to adjust the live buffer.
Thanks STB
please provide step by step instructions to adjust the live buffer.
Thanks STB
-
- Posts: 721
- Joined: Mon Nov 05, 2012 8:05 pm
- Location: Longmont, CO
- HTPC Specs:
There is no separate setting for live buffer. It simply follows the location of where you set your recordings.
-
- Posts: 1477
- Joined: Mon Aug 20, 2012 6:52 pm
- Location:
- HTPC Specs:
Yes, the live buffer follows the recording location. I would at least temporarily change that and see if your recording starts working.
I wouldn't say rename the other folders/drives, but at least change all the settings to something else temporarily, then change them back to what you want, just so they all change and hopefully clean up anything that's misdirected in the registry at the moment.
That's about all the advice I can offer since I haven't used WMC in years. I'm getting fuzzy on the details.
I wouldn't say rename the other folders/drives, but at least change all the settings to something else temporarily, then change them back to what you want, just so they all change and hopefully clean up anything that's misdirected in the registry at the moment.
That's about all the advice I can offer since I haven't used WMC in years. I'm getting fuzzy on the details.