Anyone here doing UK Sky with Omnikey card reader?
-
- Posts: 80
- Joined: Thu Jun 23, 2011 8:22 pm
- Location: United Kingdom
- HTPC Specs:
Anyone here doing UK Sky with Omnikey card reader?
Just ordered sky being installed in about a week, looks like a few people have started using the omnikey USB card reader in place of a Dreambox for reading the smart card. Anyone here been through the process and can share pointers/config?
- holidayboy
- Posts: 2840
- Joined: Sun Jun 05, 2011 1:44 pm
- Location: Northants, UK
- HTPC Specs:
I think that Tony Park is doing this, I haven't seen him around here lately though.......
You can maybe try avforums.com.
You can maybe try avforums.com.
Rob.
TGB.tv - the one stop shop for the more discerning Media Center user.
TGB.tv - the one stop shop for the more discerning Media Center user.
- tony_park
- Posts: 261
- Joined: Fri Jun 10, 2011 12:01 pm
- Location: South Yorkshire
- HTPC Specs:
haha, have been here, lurking... just not much to comment onholidayboy wrote:I think that Tony Park is doing this, I haven't seen him around here lately though.......
You can maybe try avforums.com.
I can summarise my testing of this card....
hit and miss...
the dreambox/technomate route is a lot more reliable, from my testing
I was encountering driver issues from resuming from sleep with the onmikey cardman 3121 that I was using. Quite often to get it working again, you had to unplug and re-insert - which is no good in my opinion for scheduled recordings, where you may not be around. The linux based boxes, may be a pain to get setup initially (or slightly different pain), but once they are set up, its literally fit and forget!
-
- Posts: 676
- Joined: Wed Oct 26, 2011 11:21 am
- Location:
- HTPC Specs:
i'm back on the dreambox after using omnikey for a while. like tony i had a problem and in the end i didn't have time to work out what it was, had to go back to dreambox for waf. i will try again though because i'm keen to free up the feed
-
- Posts: 80
- Joined: Thu Jun 23, 2011 8:22 pm
- Location: United Kingdom
- HTPC Specs:
Was sleep the only issue? My htpc has run 24/7 for nearly 6 years. Sleep was always a problem for other hardware like USB tuners so I just stopped trying and everything was happy.tony_park wrote:
I can summarise my testing of this card....
hit and miss...
the dreambox/technomate route is a lot more reliable, from my testing
I was encountering driver issues from resuming from sleep with the onmikey cardman 3121 that I was using. Quite often to get it working again, you had to unplug and re-insert - which is no good in my opinion for scheduled recordings, where you may not be around. The linux based boxes, may be a pain to get setup initially (or slightly different pain), but once they are set up, its literally fit and forget!
- tony_park
- Posts: 261
- Joined: Fri Jun 10, 2011 12:01 pm
- Location: South Yorkshire
- HTPC Specs:
Hi MrPhil,
I think the only issue was sleeping... or at least it was on a normal version of windows. I'm using a pc that comes with embedded windows currently, and we'd looked at using this tuner, but we couldn't get drivers to install correctly. I had mine on ebay a couple of weeks ago, think it went for about £10.... So it may be worth you trying it, and if you have problems, its not too big an outlay to loose.
HTH
Tony
I think the only issue was sleeping... or at least it was on a normal version of windows. I'm using a pc that comes with embedded windows currently, and we'd looked at using this tuner, but we couldn't get drivers to install correctly. I had mine on ebay a couple of weeks ago, think it went for about £10.... So it may be worth you trying it, and if you have problems, its not too big an outlay to loose.
HTH
Tony
-
- Posts: 676
- Joined: Wed Oct 26, 2011 11:21 am
- Location:
- HTPC Specs:
sleep wasn't the only issue for me
- tony_park
- Posts: 261
- Joined: Fri Jun 10, 2011 12:01 pm
- Location: South Yorkshire
- HTPC Specs:
care to elaborate?bobbob wrote:sleep wasn't the only issue for me
-
- Posts: 676
- Joined: Wed Oct 26, 2011 11:21 am
- Location:
- HTPC Specs:
it just crapped out while i was on holiday, no idea what it was as i say because when we got back i had to go back to the dreambox without being able to find out what the problem was. i never sleep.
i think once i saw windows reinstall the windows drivers for the card reader, as i say no idea what it was the second time round but after two days of trying to fix it and being asked why are we watching emmerdale on itvplayer i ditched it
i think once i saw windows reinstall the windows drivers for the card reader, as i say no idea what it was the second time round but after two days of trying to fix it and being asked why are we watching emmerdale on itvplayer i ditched it
- tony_park
- Posts: 261
- Joined: Fri Jun 10, 2011 12:01 pm
- Location: South Yorkshire
- HTPC Specs:
Ok - sounds like fun!
-
- Posts: 80
- Joined: Thu Jun 23, 2011 8:22 pm
- Location: United Kingdom
- HTPC Specs:
Well the card reader was cheap on Amazon so it's not a big deal to give it a go. I'm coming from a low base anyway with WAF, our Virgin Media box is crashing regularly and is frequently claiming to not be subscribed to various channels, also to record Sky Movies via the stb I have to use an app I wrote which uses the channel change hook in WMC to type in the Virgin pin number which fails to work 1 in 20 or so times.
I'll post back once the Omnikey is up and running about how successful it s.
I'll post back once the Omnikey is up and running about how successful it s.
- holidayboy
- Posts: 2840
- Joined: Sun Jun 05, 2011 1:44 pm
- Location: Northants, UK
- HTPC Specs:
I really need to get back up to speed with all of this, I'm a FreesatFromSky user with a dm500s clone that keeps my card entitlements up to date - I never have fixed Pick TV out though! (It was Sky 3 when I could last view it I think)!
Not enough hours in the day!!
Not enough hours in the day!!
Rob.
TGB.tv - the one stop shop for the more discerning Media Center user.
TGB.tv - the one stop shop for the more discerning Media Center user.
- tony_park
- Posts: 261
- Joined: Fri Jun 10, 2011 12:01 pm
- Location: South Yorkshire
- HTPC Specs:
Hi,holidayboy wrote:I really need to get back up to speed with all of this, I'm a FreesatFromSky user with a dm500s clone that keeps my card entitlements up to date - I never have fixed Pick TV out though! (It was Sky 3 when I could last view it I think)!
Not enough hours in the day!!
I was told that pick tv is now fta, so you shouldn't need to do anything with oscam etc
- holidayboy
- Posts: 2840
- Joined: Sun Jun 05, 2011 1:44 pm
- Location: Northants, UK
- HTPC Specs:
Thanks Tony, I'll scan for it when I get some time. Probably nothing worth watching on it though
Rob.
TGB.tv - the one stop shop for the more discerning Media Center user.
TGB.tv - the one stop shop for the more discerning Media Center user.
- tony_park
- Posts: 261
- Joined: Fri Jun 10, 2011 12:01 pm
- Location: South Yorkshire
- HTPC Specs:
How could you say that, I couldn't live without it
- CyberSimian
- Posts: 516
- Joined: Mon Jun 20, 2011 5:52 pm
- Location: Southampton, UK
- HTPC Specs:
Stargate Universe!holidayboy wrote:Probably nothing worth watching on it though
(Actually, I have not watched any of it yet, but I have been recording it; we are currently on series 2, I believe.)
-- from CyberSimian in the UK
-
- Posts: 80
- Joined: Thu Jun 23, 2011 8:22 pm
- Location: United Kingdom
- HTPC Specs:
Im setting this all up now. Omincard reader, Oscam, ACAMD, and DVBLogic TV Source 4.1. I've written a batch file to keep DVBLogic up to date with the Sky epg from the site at http://epg.whmcr.com/ but had to use TVSource 4.1 as the config files that site is generating doesnt seem to work with the latest version of 4.5.
All painless enough, decoded encrypted channels on the first test, so will see how it goes over the next couple of days.
All painless enough, decoded encrypted channels on the first test, so will see how it goes over the next couple of days.
-
- Posts: 676
- Joined: Wed Oct 26, 2011 11:21 am
- Location:
- HTPC Specs:
but as far as i know updating the transponder file on its own doesn't cause dvblink to update anything. i believe you would need to rescan the transponder and then remove any redundant channels and update the sources with the new ones. its ones of my biggest bugbears tbh, replacing a channel with the same name and number doesn't seem to go smoothly for me. takes a couple of sync's. thankfully transponder changes are less frequent these days, i don't think i've had to do one since adding and then removing the olympic channels, before then possibly a channel 4 HD update a few months ago. i subscribe to the king of sat rss feed but unfortunately there's no way i can see to narrow it to 28.2E only
i stand to be corrected however
i stand to be corrected however
-
- Posts: 80
- Joined: Thu Jun 23, 2011 8:22 pm
- Location: United Kingdom
- HTPC Specs:
I'm not updating the transponder file, you have reminded me I need it add that as I had completely forgotten. What I'm downloading is a pre generated config XML for TVSource that contains all the Sky channels and restarting the dvblink service. No rescan necessary.
- tony_park
- Posts: 261
- Joined: Fri Jun 10, 2011 12:01 pm
- Location: South Yorkshire
- HTPC Specs:
To get a list of changes that have been made, I use: http://en.kingofsat.net/news28.2E.php
Don't forget when you download the new transponder file, to copy it into the transponder folder for each source, as well as the template folder...
I generally, just select the frequencies changed to rescan, and this then limits any changes that happen.
Tony
Don't forget when you download the new transponder file, to copy it into the transponder folder for each source, as well as the template folder...
I generally, just select the frequencies changed to rescan, and this then limits any changes that happen.
Tony